Author Topic: Gtb Sys 1 Parts Wanted - Close Encounters  (Read 188 times)

0 Members and 1 Guest are viewing this topic.

Offline Pintoxicated

  • Trade Count: (+9)
  • ******
  • Forum Posts:
  • Table Top - Albury NSW
Gtb Sys 1 Parts Wanted - Close Encounters
« on: January 15, 2013, 07:19:28 PM »
Hi Guys,

I am about to start bringing a Close Encounters machine back to life and was wondering if anyone has any Sys 1 parts laying around, especially for a Close Encounters machine.

In particular I would like the following if possible -

Backglass
Cabinet
Coin Door or coin door outer skin
Aust transformer along with the board and bits and pieces in the cabinet it is mounted on and with.
Legs

I might be interested in any other Sys 1 parts as well.

Cheers,
Blair
Addicted to pins.

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Gtb Sys 1 Parts Wanted - Close Encounters
« Reply #1 on: January 15, 2013, 07:39:53 PM »
Hi Blair
           I have a coin door with frame plus a shitload of system 1 playfield parts from the Marty Machine bundle can't help with a cabinet or backglass sadly transformer ill have to take a look

Offline The pinballist formally known as Dean Morgan

  • Trade Count: (+3)
  • ******
  • Forum Posts:
  • Berwick Vic
Re: Gtb Sys 1 Parts Wanted - Close Encounters
« Reply #2 on: January 15, 2013, 07:53:12 PM »
I have a back glass, will have a look at it and let you know what I want for it. Not sure as yet if I want to sell it as it is anging on games room wall
Im a Gottlieb Man - System 1 & 80 Rock

Offline Pintoxicated

  • Trade Count: (+9)
  • ******
  • Forum Posts:
  • Table Top - Albury NSW
Re: Gtb Sys 1 Parts Wanted - Close Encounters
« Reply #3 on: January 15, 2013, 10:48:56 PM »
Thanks guys.  If you could let me know how much you would like for anything you are willing to sell it would be appreciated.

The backglass I have isn't totally stuffed but there are a few spots where the globes have rubbed through the artwork.  I understand if you don't want to sell anything as well.

I need to weigh it all up and make sure I  don't over capitalise on the machine as well.
Addicted to pins.