GNR Magnet Problems

[Slash]

Thanks Cruiserman, gave your idea a try this morning and as I suspected only one of the three magnets was working.

I tidied up one of the other MOSFET's and scraped some crap from around it on the board and got another working.

The third one tho after messing around for ages I ended up having to run wires from all three legs of the MOSFET, looks like shite but it finally works too.  I'm guessing there are broken tracks running from it.

I haven't seen anyone that sells replacement boards for this that I know off? Obviously mines working fine now but was just wondering for future reference.

[Homepin]

Both kit form and ready made and tested:

http://www.homepin.com/magnet.html

[humpalot]

Both kit form and ready made and tested:

http://www.homepin.com/magnet.html

Must have the cap installed at C4, otherwise the magnets just lock on 

[Slash]

ftp://

Both kit form and ready made and tested:

http://www.homepin.com/magnet.html

Cool I didn't realize you did this board. Next time the MOSFET's go (which will no doubt happen again relatively soon) I will just grab a new one from you. I dont think mine will take too kindly to further burning/soldering from me and it's already starting to look like the spaghetti incident with my dodgy wires on the back.

[Pintoxicated]

Stern do sell the magnet board as well but they cost a fair bit more than Mike's board.. I know which board i would be buying.