Author Topic: Wh20 Sound Issue  (Read 330 times)

0 Members and 3 Guests are viewing this topic.

Offline Agentbarry

  • Trade Count: (0)
  • ***
  • High Score Initials:
  • Forum Posts:
  • Perth
Wh20 Sound Issue
« on: April 09, 2013, 05:01:45 PM »
Hi all, just a quick question regarding the sound board used in White Water

I recently bought a Flipper Fidelity Speaker replacement kit since the old speakers were falling apart, the sound board works but the audio quality goes shocking once you go past volume 10.

I was looking at replacing the electrolytic capacitors on the board just because I’m always suspicious of them drying out

I also found after some research that c21 & 22 the 10uF TANT caps can cause some problems

Has anyone here come across this problem before? am I going down the right road replacing the caps?

Cheers
Allan

Offline Homepin

  • Trade Count: (+15)
  • ******
  • Forum Posts:
  • Not a business - A Passion!
Re: Wh20 Sound Issue
« Reply #1 on: April 09, 2013, 05:24:42 PM »
Tantalum capacitors are hideous and should be banned - they cause all sorts of odd problems although the most common fault with them is they short circuit.
Replacement Pinball PCBs that remain faithful to the originals

Offline Mr Pinbologist

  • Trade Count: (+5)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Wauchope NSW
Re: Wh20 Sound Issue
« Reply #2 on: April 09, 2013, 05:29:51 PM »
Tantalum capacitors are hideous and should be banned - they cause all sorts of odd problems although the most common fault with them is they short circuit.

+1, I have come across these tantalum caps being short circuit MANY times.

Offline Agentbarry

  • Trade Count: (0)
  • ***
  • High Score Initials:
  • Forum Posts:
  • Perth
Re: Wh20 Sound Issue
« Reply #3 on: April 09, 2013, 09:29:44 PM »
cheers for the reply's, i will replace c21 - 22 and see if it makes a difference

Offline Homepin

  • Trade Count: (+15)
  • ******
  • Forum Posts:
  • Not a business - A Passion!
Re: Wh20 Sound Issue
« Reply #4 on: April 09, 2013, 09:32:03 PM »
Can't hurt - just use electros
Replacement Pinball PCBs that remain faithful to the originals

Offline robm

  • Trade Count: (+1)
  • ******
  • Forum Posts:
  • Townsville
Re: Wh20 Sound Issue
« Reply #5 on: April 09, 2013, 09:52:48 PM »
Just double check the schematics - i thing C21 is a 1uF, not 10uF

Offline Agentbarry

  • Trade Count: (0)
  • ***
  • High Score Initials:
  • Forum Posts:
  • Perth
Re: Wh20 Sound Issue
« Reply #6 on: April 11, 2013, 04:26:41 PM »
ok, i will check the drawings out this arvo when i get home. and i will use electros this time. much easier to get