« previous next »
Pages: [1]   Go Down

Author Topic: Fathom problem  (Read 341 times)

0 Members and 1 Guest are viewing this topic.

Offline pinfrog

  • Trade Count: (0)
  • ****
  • Forum Posts:
    • Perth WA
Fathom problem
« on: April 05, 2014, 12:11:21 PM »
Hi all, Decided its time to sell the Fathom . Turned it on this morning to play a few games and all five rollover buttons are not working. They do not register at all. Would it be switch problem or is it something worse? Cheers Les.
Logged

Offline Crashramp

  • Trade Count: (+3)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Albury
Re: Fathom problem
« Reply #1 on: April 05, 2014, 12:53:39 PM »
I'd love a Fathom but your problems maybe simple. Have you checked the fuses?
Logged

Offline pinfrog

  • Trade Count: (0)
  • ****
  • Forum Posts:
    • Perth WA
Re: Fathom problem
« Reply #2 on: April 05, 2014, 12:56:55 PM »
Thanks for the reply , I will check all the fuses.
Logged

Offline Pop Bumper Pete

  • Trade Count: (+4)
  • ******
  • Forum Posts:
    • Ballarat
Re: Fathom problem
« Reply #3 on: April 05, 2014, 01:05:55 PM »
Follow the wires back
Sounds like a wire common to all switches is broken
Logged

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
    • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Fathom problem
« Reply #4 on: April 05, 2014, 01:23:05 PM »
Quote from: Pop Bumper Pete on April 05, 2014, 01:05:55 PM
Follow the wires back
Sounds like a wire common to all switches is broken

+1

Check the switch matrix. You will find more switches that may not work. Re seat the connectors to the MPU.
Logged
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline Boots

  • Trade Count: (+8)
  • ******
  • Forum Posts:
    • Adelaide
Re: Fathom problem
« Reply #5 on: April 05, 2014, 02:08:38 PM »
Quote from: Strangeways on April 05, 2014, 01:23:05 PM
Quote from: Pop Bumper Pete on April 05, 2014, 01:05:55 PM
Follow the wires back
Sounds like a wire common to all switches is broken

+1

Check the switch matrix. You will find more switches that may not work. Re seat the connectors to the MPU.

Check for broken solder joints on all the pin headers.
If you wiggle the connectors does it intemittently work?
Logged
Pages: [1]   Go Up
« previous next »