power rectifier standoffs

[pinball god]

Could someone advise where I can get a couple of these. Noticed on my embryon two of these where broken on the rectifier pcb. They hold in place the plastic protector sheet. Thanks

[Strangeways]

These hold the plastic shield above the PCB. Unobtainium 

[Toads]

That's a job for mr swinks and his 3D printer.

[pinball god]

These hold the plastic shield above the PCB. Unobtainium 

bugger so their not made of unobtainium.

[solar value]

From memory the three parts are not all the same. Two of them are like hinges and one is a clip. The clip is available from Marco Specialties:

http://www.marcospecialties.com/pinball-parts/M-1829-3

I haven't found the hinges anywhere but would also like some. If the good one you have is a hinge maybe you could send it to Swinks to be reproduced.

[Strangeways]

From memory the three parts are not all the same. Two of them are like hinges and one is a clip. The clip is available from Marco Specialties:

http://www.marcospecialties.com/pinball-parts/M-1829-3

I haven't found the hinges anywhere but would also like some. If the good one you have is a hinge maybe you could send it to Swinks to be reproduced.

That is the exact part !