Author Topic: ATARI MIDDLE EARTH DISPLAY HELP  (Read 254 times)

0 Members and 2 Guests are viewing this topic.

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
ATARI MIDDLE EARTH DISPLAY HELP
« on: December 12, 2009, 06:55:59 PM »
I recently purchased a POS Atari Middle earth pinball from mark C i think i have it all sorted except the displays.   When first powered on the displays show nearly all segments but during gameplay  every second digit flickers but they all show the correct number.    Where do i start???

Offline dj10555

  • Trade Count: (+1)
  • ****
  • Forum Posts:
Re: ATARI MIDDLE EARTH DISPLAY HELP
« Reply #1 on: December 12, 2009, 07:57:28 PM »
I'm not familiar with this game but would try disconnecting all the displays but one and try one at a time incase a bad display is causing the error. Then try each display, one at a time. This should tell you whether you have one or more faulty displays or a fault in the logic which control them.

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: ATARI MIDDLE EARTH DISPLAY HELP
« Reply #2 on: December 12, 2009, 07:59:17 PM »
Sadly this game has the display on the bottom apron and all 4 displays are one unit

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: ATARI MIDDLE EARTH DISPLAY HELP
« Reply #3 on: December 12, 2009, 09:11:34 PM »

Have a squizz here, Daniel !

http://marvin3m.com/atari/index.htm

Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Marty Machine

  • Guest
  • Trade Count: (0)
Re: ATARI MIDDLE EARTH DISPLAY HELP
« Reply #4 on: December 12, 2009, 09:20:45 PM »
I thought the Middle Earth was board-less?? or you fitted your own??

Happy to help Dan, if some schematics are around....

MM.