Medieval Madness Ball guides (Wireforms) wanted

[furballx]

Hi All,
   I need a set of playfield wire ball guides to suit a Medieval
Madness.  I can get 2 from the list below off Marco's (MARCO written
next to them)  but would like to get the full set in one go if
possible.  

Here is one of the parts I need (to save confusion), and the sizes are
in the list below, with the Williams part numbers.

http://www.marcospecialties.com/itemdesc.asp?ic=12%2D7391%2D32

Will take a good second hand set if you have a trashed playfield to
strip, or will buy just the ones not stocked by Marco's if you prefer.

12-7392.1-28      "ball guide 1.75""L  .156 barbed"    1MARCO

12-7391-41        "ball guide 2.56""L  .125 barbed"    2off

12-7391-50        "ball guide 3.13""L  .125 barbed"    1off

12-7391-18        "ball guide 1.13""L  .125 barbed"    1off

12-7391-32        "ball guide 2.00""L  .125 barbed"    1MARCO

Thanks if you can help me out,
Dave.

[furballx]

BUMP'O, Nobody 

Dave

[johnwartjr]

Perhaps you could make your own out of some bicycle spokes, music wire, etc

[goodolddays]

Coathanger wire works well too , and polishes up nicely