Cabinet Start Button Dress Ring

[swinks]

Here is a simple little dress mod for your 90's Bally / WMS cabinet. It is for the cabinet to slide into the start button hole that will cover any minor decal / cabinet wear from the years of pushing that Start. Just apply 2-4 small dabs of silicon glue to the back side and press into place (or use some tape to make the fit tight) and now you can hide that wear with a simple little Start Button Dress Ring. Now all you have to do is pick the material & colour and make the cabinet look like new again.

There is 2 sizes:
- 1/8 (3.175mm) front face
- 1/4" (6.35mm) front face

So you can pick the best size to suit the cabinet graphics as well as colours

https://www.shapeways.com/model/1826761/pinball-start-button-dress-ring-small-lip.html?li=my-models&materialId=62

https://www.shapeways.com/model/1831856/pinball-start-button-dress-ring-large-lip.html?li=my-models&materialId=62

[DSB]

Nice, so simple but effective! I just had a why didn't I think of that moment.

[oldskool1969]

Classic