Massive Project-Gottlieb Big House

[The pinballist formally known as Dean Morgan]

Ok have put this repair off long enough.  So today I started.  It is a Gottlieb Big House. Some idiot cut through the wiring looms from both the head to cabinet and also all from the Playfield. To make it worse they threw the loom with ALL the backbox plugs away.

Now most would part this machine out, but the rest of it like Playfield, cabinet and backglass are in good condition.  So too good IMO to just part out.  So the rewire has finally begun.  Wish me luck and I will keep you posted.

[Retropin]

good luck!

[The pinballist formally known as Dean Morgan]

  can't upload photos from photo bucket asgghh

[The pinballist formally known as Dean Morgan]

 

[ddstoys]

 Good luck mate long time coming

[The pinballist formally known as Dean Morgan]

Good luck mate long time coming

thanks Daniel, I'm not known for speed

[4_amusement_only]

Finally started on it!

How did that Arena lead go? How are you going about the rewire?

[valentin27]

That was my first pinball machine, good luck !

[Boots]

Ok have put this repair off long enough.  So today I started.  It is a Gottlieb Big House. Some idiot cut through the wiring looms from both the head to cabinet and also all from the Playfield. To make it worse they threw the loom with ALL the backbox plugs away.

Now most would part this machine out, but the rest of it like Playfield, cabinet and backglass are in good condition.  So too good IMO to just part out.  So the rewire has finally begun.  Wish me luck and I will keep you posted.

Is the Class of 1812 wiring loom on ebay right now any use to you?

http://www.ebay.com.au/itm/Gottlieb-Class-Of-1812-Wiring-Loom-Harness-/391044715769?pt=LH_DefaultDomain_15&hash=item5b0c14d4f9

[The pinballist formally known as Dean Morgan]

The Arena and class of 1812 are no use unfortunate.  I will extend each wire and terminate in new connectors myself