In the Snackbar Mod V1.0 I made 6 protos and 99 production units which will be floating around the whole world in peoples games. Many people know me for my engineering approach with the focus to make and supply a quality, reliable and long lasting mod.
So the mod will still remain very similar looking - actually 95% the same and very conscious of keeping the cool iconic era look. The 5% change is I plan on removing the el-wire from the design for 3 reasons - cost, supply and 12 vdc power drain on a heavily modded CFTBL game. I am proposing to switch to "end lit" perspex panels housed in the side of the snackbar mod. In addition I will supply 2 lights - one for under the dome (which people had to buy their own in the past) and the other for inside the snackbar top to end light both perpex panels. The beauty of this proposed change is that you will have 1-6 or more colour choices (white, blue, red, green, yellow) to light up your perpex adding your personal touch to the mod. In addition the goal is to not draw on the 12vdc in the backbox and therefore reduce that modding stress of power issues. Though v1.0 did not draw alot but in a couple of circumstances was the straw that broke the camels back causing a minor headache for a short period. The lights will now be power by the gi socket underneath the snackbar mod removing the need for a lead back to the backbox.
The stainless steel plate will not change nor will the post locations as am conscious of some guys possibly wanting to upgrade their v1.0 tops to v2.0 tops.
The decals won't change as I am quite happy with them but open to some minor suggestions.
The mounting system will change a little as my goal is to reduce the screws on top and make it easier to install with no requirement for ramps to come off. The result was I was able to reduce the noticeable screws from 5 to 2.
It will still have a red dome, with the aqua blue for the main body as it ties in with the decal and fits in with the playfield art.
.
.
.
This time around with payment, I will request in Aus Dollars as last time I requested in USD as now most parts are Aus made / supply.
The Cost - is $227 (excluding paypal fees) Australian Dollars and will come with all parts including all light components + Postage via Paypal.
Postage - will be finalised at time of sending though roughly $21.50 to US/Canada & $25.50 to Europe and will be registered and will be charged at cost only. And those in Aus - worst case registered is $15 but could be a little cheaper - depends on location.
For the guys who supported the Snackbar v1.0, you will be honored with a 5% on the full mod or tops only. But remember for the v1.0 guys wanting just the tops only, if you want the base down the track I will honour the 5% discount and it will be $28 with another $20-$25 shipping so please consider your options as you may choose to get a full kit and then be able to sell the kit that you don't want down the track.
I will be offering a 5% discount to anyone buying a poster mod only after they have already paid for a snackbar mod V1.0 / 2.0.
I will make a small percentage donation back to Aussie Pinball from each unit sold as well.
Photos below of of a home test print with the goal to have final product photos in a few weeks time. The first photo shows one the top light blade sanded to help diffuse the light a little better and soften the look - all will be supplied with this.
