« previous next »
Pages: [1]   Go Down

Author Topic: t2 solenoid problem  (Read 927 times)

0 Members and 3 Guests are viewing this topic.

Offline pinball god

  • Trade Count: (+1)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Melbourne
  • Metallica is here to stay
t2 solenoid problem
« on: March 25, 2016, 06:27:49 PM »
While having a game, ball 2 didn't pop out of the trough. Did a solenoid test and both gun kicker and outhole coils do not fire. So I figure it cannot be a fuse. Also checked wiring and J130 and look ok. Switch for outhole tests ok and is currently closed with a ball sitting on top. Any ideas of steps I have missed in checking? Thanks
Logged
Still loving my Metallica Premium

Offline MartyJ

  • Trade Count: (+4)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Melbourne
Re: t2 solenoid problem
« Reply #1 on: March 25, 2016, 06:40:56 PM »
Its a write off Rob.  I'll buy it from you for what you paid initially!!!

Ball may have hung up in trough.  Small divot or similar?  Might have to remove it and give it a good sand with some 80grit.
Logged

Offline pinball god

  • Trade Count: (+1)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Melbourne
  • Metallica is here to stay
Re: t2 solenoid problem
« Reply #2 on: March 25, 2016, 09:00:13 PM »
Quote from: MartyJ on March 25, 2016, 06:40:56 PM
Its a write off Rob.  I'll buy it from you for what you paid initially!!!

Ball may have hung up in trough.  Small divot or similar?  Might have to remove it and give it a good sand with some 80grit.
damn I was afraid of that. I must be the unluckiest guy in town. Would $100 as a parts machine be a fair price????  *.*
Logged
Still loving my Metallica Premium

Offline MartyJ

  • Trade Count: (+4)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Melbourne
Re:
« Reply #3 on: March 25, 2016, 09:03:57 PM »
Yeah as long as you can drop it off.  That's fair
Logged

Offline robm

  • Trade Count: (+1)
  • ******
  • Forum Posts:
    • Townsville
Re:
« Reply #4 on: March 25, 2016, 09:09:51 PM »
Did you test for voltage at each lug of the coils? Should be around 70v. Quite possible if only a couple are not working that the power supply wiring that is daisy chained to each coil could have come unsoldered at a coil upstream of those two.
Logged

Offline MartyJ

  • Trade Count: (+4)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Melbourne
Re:
« Reply #5 on: March 25, 2016, 09:11:37 PM »
Ignore what I said rob.  Old age I thought the coil was firing!
Logged

Offline pinball god

  • Trade Count: (+1)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Melbourne
  • Metallica is here to stay
Re:
« Reply #6 on: March 25, 2016, 09:15:18 PM »
Quote from: MartyJ on March 25, 2016, 09:11:37 PM
Ignore what I said rob.  Old age I thought the coil was firing!
I did as I've just started looking again and both outhole and gun kicker not firing. I loaded the gun and it wouldn't fire so there must be a wire problem between the two I think??? Will check voltages as suggested. will get back to you guys
Logged
Still loving my Metallica Premium

Offline pinball god

  • Trade Count: (+1)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Melbourne
  • Metallica is here to stay
Re: t2 solenoid problem
« Reply #7 on: March 25, 2016, 09:45:27 PM »
All done thanks guys, the rh kicker return coil had a wire off. Once apron came off I saw it.
Logged
Still loving my Metallica Premium

Offline robm

  • Trade Count: (+1)
  • ******
  • Forum Posts:
    • Townsville
Re:
« Reply #8 on: March 25, 2016, 10:59:38 PM »
Nice. Love an easy fix!
Logged
Pages: [1]   Go Up
« previous next »