Author Topic: Remakes of Classics - Would you buy one ?  (Read 26345 times)

0 Members and 2 Guests are viewing this topic.

Offline punkin

  • Trade Count: (0)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Woolgoolga NSW
Re: Remakes of Classics - Would you buy one ?
« Reply #15 on: May 05, 2021, 06:06:38 AM »


One was sold on this very forum late last year. I believe an ultra rare "Spectrum" as well. One sold in Queensland last June/July, and at least 2 projects (Junk, but would be restored by a competent person) in the last 12 months. They are around, and since I bought my Fathom 15 years ago, there has been at least a dozen go up for sale since (4 since Covid alone). I've imported 5 Fathoms, and they have all been sold except one..

Very easily to source parts for a mass produced game that is 40 years old. Other than consumables or parts required for a restoration, that original charm and gameplay will be good for another 40 years.

"Restored" VS "Wank NIB" is an interesting comparison. My $ will always be on the original (restored). But I'd rather a game that surpasses Fathom. Obviously the tech is available.


The Fathom and the Spectrum were advertised here as well, but i bought them both through facebook, but the result is the same. I have them both.


That's how come i know that i want a new shiny Fathom (that is an improvement as it will be switchable to new code), because i play the old one a lot and love it. Fathom is why i sold my Centaur and will soon sell my Flash.


Now pick this apart if you will;


The one that you are talking about was advertised at $9,000. The cab has lots of marks and nicks, the backglass is quite nice and the playfield is good for it's age with no real wear as it has a playfield protector fitted. I probably didn't pay nine as i made an offer for both machines together (and later bought his Black Hole too)


So do the sum's in your head what it would cost me to send to any of you guys ($500 for Bill both ways for a start) to gut the machine, restencill the cab, replate all the mechs, new drops ect, send the playfield to Tim and reinstall, new chrome trim, new coindoor etc.


There's only 2.5k difference between the asking price for a nice original unrestored Fathom, and the new Haggis Mermaid (LE) edition (delivered).


If you are not all hooked up on the iffy judgments of the abilities of the builders being able to imagine something new, then the maths is simple. I'd have over $14k in it if i went full top end resto. And the machine will be available again to someone who may actually want to spend that kind of coin to have an original resto.


To me it's a no brainer, i'm not taking a chance on a new machine that i may not like to play or be able to figure out the rules (looking at you GnR), and i'm getting a new machine with improvements and warranty (for what that's worth). The old machine still exists and is available for someone to love as it is and play for the next forty years or restore and there are 4-500 new machines out there in the world for countless others to enjoy.


What's not to like about that?
Looking for Bally Space Invaders, Stern Orbitor 1

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Remakes of Classics - Would you buy one ?
« Reply #16 on: May 05, 2021, 03:02:01 PM »
Surf Champ NIB with wank factor! ;-)

Blasphemy ! Never again mention "Surf Champ" and "wank factor" in the same sentence !
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Remakes of Classics - Would you buy one ?
« Reply #17 on: May 05, 2021, 03:35:46 PM »


One was sold on this very forum late last year. I believe an ultra rare "Spectrum" as well. One sold in Queensland last June/July, and at least 2 projects (Junk, but would be restored by a competent person) in the last 12 months. They are around, and since I bought my Fathom 15 years ago, there has been at least a dozen go up for sale since (4 since Covid alone). I've imported 5 Fathoms, and they have all been sold except one..

Very easily to source parts for a mass produced game that is 40 years old. Other than consumables or parts required for a restoration, that original charm and gameplay will be good for another 40 years.

"Restored" VS "Wank NIB" is an interesting comparison. My $ will always be on the original (restored). But I'd rather a game that surpasses Fathom. Obviously the tech is available.


The Fathom and the Spectrum were advertised here as well, but i bought them both through facebook, but the result is the same. I have them both.


That's how come i know that i want a new shiny Fathom (that is an improvement as it will be switchable to new code), because i play the old one a lot and love it. Fathom is why i sold my Centaur and will soon sell my Flash.


Now pick this apart if you will;


The one that you are talking about was advertised at $9,000. The cab has lots of marks and nicks, the backglass is quite nice and the playfield is good for it's age with no real wear as it has a playfield protector fitted. I probably didn't pay nine as i made an offer for both machines together (and later bought his Black Hole too)


So do the sum's in your head what it would cost me to send to any of you guys ($500 for Bill both ways for a start) to gut the machine, restencill the cab, replate all the mechs, new drops ect, send the playfield to Tim and reinstall, new chrome trim, new coindoor etc.


There's only 2.5k difference between the asking price for a nice original unrestored Fathom, and the new Haggis Mermaid (LE) edition (delivered).


If you are not all hooked up on the iffy judgments of the abilities of the builders being able to imagine something new, then the maths is simple. I'd have over $14k in it if i went full top end resto. And the machine will be available again to someone who may actually want to spend that kind of coin to have an original resto.


To me it's a no brainer, i'm not taking a chance on a new machine that i may not like to play or be able to figure out the rules (looking at you GnR), and i'm getting a new machine with improvements and warranty (for what that's worth). The old machine still exists and is available for someone to love as it is and play for the next forty years or restore and there are 4-500 new machines out there in the world for countless others to enjoy.


What's not to like about that?

I bought my Fathom for AUS$1500 + AUS$700 airfreight from Germany. That was expensive in 2004. I would need to check my records, but the Fathoms I brought in containers from Germany were around the $1000 Euros and I bought a Fathom from the USA for AUS$1750 when the AUS was at parity. Fathoms in collections in Australia were rare, but the only one offered to me was $3500, circa 2003. It was restored. You are referring to post 2016 prices and THEN Covid prices which are in some cases 300% what they were when Fathoms were around. I sold arguably the best restored Fathom in the country in 2012 ish for $7500. It was repainted, cleared playfield - absolutely perfect. That was considered "expensive" back then, and remains in pristine condition.

To your point of restorers working on games in Today's climate - MUCH different to what it was 10-15 years ago, as no-one was restoring games as a business, moreso a hobby (like I was).

I restore machines for a living and I've been around them, literally, all my life. I've NEVER seen the industry this good for sellers. The prices are outright ridiculous across the board. The standard of the workmanship has deteriorated UNLESS you buy from established businesses with competent restorers. So I understand your point, but the idea that reproducing a NEW game at that price point is better than the prices and availability of the original game demonstrates that the person making that claim is either new to the hobby, or has not done any homework.

Now this has gone a fair bit "off topic", but I want to state I wish all the best for anyone producing new games, or buying these new games for their collections. For the record, I would in all cases, choose the original restored, than a copy of the original. That's just the "purist" in me and nothing would change that.
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline punkin

  • Trade Count: (0)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Woolgoolga NSW
Re: Remakes of Classics - Would you buy one ?
« Reply #18 on: May 05, 2021, 04:55:43 PM »


I bought my Fathom for AUS$1500 + AUS$700 airfreight from Germany. That was expensive in 2004. I would need to check my records, but the Fathoms I brought in containers from Germany were around the $1000 Euros and I bought a Fathom from the USA for AUS$1750 when the AUS was at parity. Fathoms in collections in Australia were rare, but the only one offered to me was $3500, circa 2003. It was restored. You are referring to post 2016 prices and THEN Covid prices which are in some cases 300% what they were when Fathoms were around. I sold arguably the best restored Fathom in the country in 2012 ish for $7500. It was repainted, cleared playfield - absolutely perfect. That was considered "expensive" back then, and remains in pristine condition.

To your point of restorers working on games in Today's climate - MUCH different to what it was 10-15 years ago, as no-one was restoring games as a business, moreso a hobby (like I was).

I restore machines for a living and I've been around them, literally, all my life. I've NEVER seen the industry this good for sellers. The prices are outright ridiculous across the board. The standard of the workmanship has deteriorated UNLESS you buy from established businesses with competent restorers. So I understand your point, but the idea that reproducing a NEW game at that price point is better than the prices and availability of the original game demonstrates that the person making that claim is either new to the hobby, or has not done any homework.

Now this has gone a fair bit "off topic", but I want to state I wish all the best for anyone producing new games, or buying these new games for their collections. For the record, I would in all cases, choose the original restored, than a copy of the original. That's just the "purist" in me and nothing would change that.


Having trouble following all that mate. I'm not referring to post 2016 prices at all that i can see, just current pricing i don't know why you threw the word covid in there in capitals, but the current pricing is what it is....


I think you are getting the 'this is crazy pricing nowadays' argument mixed up with the 'what's this worth in today's market' argument.


I'm only talking about the present as a collector and the present is where i spend most of my time.


In reality a Fathom machine today (the time I and others are dealing with this decision) is as i pointed out above. (9k players Bally. 11.5 new Haggis)

Quote
I understand your point, but the idea that reproducing a NEW game at that price point is better than the prices and availability of the original game demonstrates that the person making that claim is either new to the hobby, or has not done any homework.


I'm having real problems trying to understand this sentence, but it seems like you are saying i cannot be right about the simple financial mathematics because i have not been collecting pinball machines for a long time?


I understand and respect that you are a purist and would rather pay much more for a restored game than a brand new reproduction. But i don't understand how i don't get to make a basic financial decision in todays market without being judged as not having a valid opinion seeing as i don't have any purist blinkers on. i just want the best, nicest pinball machine to play and own.


The market is here and now for those of us who have just fell in love with this beautiful gift to our lives and the people who fill this corner of the world. The market is not so much good for sellers, us buyers who don't haver established collections are in the same market mate, so spare a thought for us.
I have to buy new machines at the current prices. In order to buy the new machines i want i have to sell the ones i don't want as much. I have to sell the machines at the prices i have to buy them or I'd be going backward and people would buy them just to flip them. I don't do that.


Like it or not, remember 2013 as much as you want, but a players Tom is 10k and rising and a good Fathom is 9k and rising.


Hope CGC makes Theatre of Magic again, I'm in like Flynn.


Apologies for sidetracking the thread, quite enjoying the robust discussion and would be happy if one of you guys with the extra buttons could split the thread?
« Last Edit: May 05, 2021, 04:58:02 PM by punkin »
Looking for Bally Space Invaders, Stern Orbitor 1

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Remakes of Classics - Would you buy one ?
« Reply #19 on: May 05, 2021, 06:24:53 PM »
Topic Split - Great suggestion @punkin  ^^^


Early on in the discussion, Andy @oldskool1969 mentioned that an original Fathom was hard to track down, so I was referring back to the early days when it was almost impossible, but after waiting and looking high and low - I found one. After that purchase, I think I've bought 5 or 6 Fathoms, and I know of one that might be for sale in QLD in the coming months. In the last 2 years, JUNKERS from dealers have gone for ok pricing. My eyesight is terrible these days, but I can't see where I have "covid" in capitals ? Nor a reference to 2016 ? My point is that you guys looking at buying Fathoms for $3500 missed out a long time ago, BUT, if you look hard, they are around, and not for $9000 in decent condition. $9K is covid price. It is NUTS for any Bally SS from that era with the exception of KISS or Playboy. If I missed a $3500 Fathom, I would know it would be difficult to find a nice $7000 (their true pre covid value). This is the MASSIVE issue with prices at the moment. Sellers can name their price (any game), and people will pay it. So there's an argument of sellers' greed and buyers' impatience. Or you can sit on your hands and wait it out. I can go through my list of "Holy Grails" and not once did I even get close to over paying. Now, almost every game sold in the current market is WAY overpriced.


So in my case, I look at the price of $11.5K for a remake, and I'm left in disbelief. I live in the present too and I can guarantee I will find a VERY nice Fathom between now and next year for $5500 TOPS by calling people and keeping an eye on the marketplace. Bookmark this thread. If it falls though, bad luck, if not, I'll supply photos.


When I'm referring to "homework" - It is the basic background checks and due diligence required before buying something. It is really rare for anyone these days to buy something without looking around. That's the point I'm making. I receive calls almost every day for "hard to find" parts and machines, and I have the same stock standard answer that if you do your homework and be patient, you will find what you are looking for at a fair price. It is like the Woodrails. They rarely change hands or go up for sale. Does not mean they are extinct or cost millions. It means you have to shake the tree, do some "homework" and you will have a Woodrail or two. I know of 1500 woodrails in QLD - just sitting there, rotting away. It is no big secret, many pinheads know the story.


The short version of my point is that I struggle with the idea that pinheads will part with $11.5K on a remake of a game, when the original can be located for less. If you have $11.5 to burn - good luck to you - I hope you LOVE the game. If you want something "modernized" - I have no problem with it. Is it really worth $11.5K - I don't know - I've never built a pinball (Hats off to those that have). I would not part with $11.5 for a remake BECAUSE I know that I can buy and original, in good condition, for less.

Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline pinoffski

  • Trade Count: (0)
  • *****
  • Forum Posts:
  • Wollongong NSW
Re: Remakes of Classics - Would you buy one ?
« Reply #20 on: May 05, 2021, 06:27:31 PM »
I have one of those junk fathoms as you know Neno  (was good to meet you)
payed absolute stupid stupid money for it .
was not happy to pay that but i have a real fathom
spent heaps on a lot of new parts also had to make some bits for target mechs that were unavailable
 + some bling stainless steel bits

I like new machines but ...

Offline oldskool1969

  • Trade Count: (0)
  • ******
  • High Score Initials:
  • Forum Posts:
  • perth
Re: Remakes of Classics - Would you buy one ?
« Reply #21 on: May 05, 2021, 07:34:32 PM »
I am man whoring to buy Fathom 2.0 #181 , so she'll be right. I invest in fun ( I hope the game will be ) I don't look at it any other way or I will cry.
I just can't look at the pricing. My collection is refining very nicely and hopefully this price madness will settle. I doubt it some how. I did pre order the series so if anything comes out people like, hit me up as there is no way I can afford future titles as of present. CENTAUR is spoken for if released and so is EBD ( maybe )

Id be really stuffed if they did RADICAL .
If it isn't broke, it isn't pinball.

Offline punkin

  • Trade Count: (0)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Woolgoolga NSW
Re: Remakes of Classics - Would you buy one ?
« Reply #22 on: May 06, 2021, 04:41:21 AM »
I have one of those junk fathoms as you know Neno  (was good to meet you)
payed absolute stupid stupid money for it .
was not happy to pay that but i have a real fathom
spent heaps on a lot of new parts also had to make some bits for target mechs that were unavailable
 + some bling stainless steel bits

I like new machines but ...


So without going into detail, could you tell us how much you currently have in your original and how much you still have to do to bring it up to 'restored/collectors' quality?
Looking for Bally Space Invaders, Stern Orbitor 1

Offline punkin

  • Trade Count: (0)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Woolgoolga NSW
Re: Remakes of Classics - Would you buy one ?
« Reply #23 on: May 06, 2021, 05:15:33 AM »
Topic Split - Great suggestion @punkin  ^^^


Early on in the discussion, Andy @oldskool1969 mentioned that an original Fathom was hard to track down, so I was referring back to the early days when it was almost impossible, but after waiting and looking high and low - I found one. After that purchase, I think I've bought 5 or 6 Fathoms, and I know of one that might be for sale in QLD in the coming months. In the last 2 years, JUNKERS from dealers have gone for ok pricing. My eyesight is terrible these days, but I can't see where I have "covid" in capitals ? Nor a reference to 2016 ? My point is that you guys looking at buying Fathoms for $3500 missed out a long time ago, BUT, if you look hard, they are around, and not for $9000 in decent condition. $9K is covid price. It is NUTS for any Bally SS from that era with the exception of KISS or Playboy. If I missed a $3500 Fathom, I would know it would be difficult to find a nice $7000 (their true pre covid value). This is the MASSIVE issue with prices at the moment. Sellers can name their price (any game), and people will pay it. So there's an argument of sellers' greed and buyers' impatience. Or you can sit on your hands and wait it out. I can go through my list of "Holy Grails" and not once did I even get close to over paying. Now, almost every game sold in the current market is WAY overpriced.


So in my case, I look at the price of $11.5K for a remake, and I'm left in disbelief. I live in the present too and I can guarantee I will find a VERY nice Fathom between now and next year for $5500 TOPS by calling people and keeping an eye on the marketplace. Bookmark this thread. If it falls though, bad luck, if not, I'll supply photos.


When I'm referring to "homework" - It is the basic background checks and due diligence required before buying something. It is really rare for anyone these days to buy something without looking around. That's the point I'm making. I receive calls almost every day for "hard to find" parts and machines, and I have the same stock standard answer that if you do your homework and be patient, you will find what you are looking for at a fair price. It is like the Woodrails. They rarely change hands or go up for sale. Does not mean they are extinct or cost millions. It means you have to shake the tree, do some "homework" and you will have a Woodrail or two. I know of 1500 woodrails in QLD - just sitting there, rotting away. It is no big secret, many pinheads know the story.


The short version of my point is that I struggle with the idea that pinheads will part with $11.5K on a remake of a game, when the original can be located for less. If you have $11.5 to burn - good luck to you - I hope you LOVE the game. If you want something "modernized" - I have no problem with it. Is it really worth $11.5K - I don't know - I've never built a pinball (Hats off to those that have). I would not part with $11.5 for a remake BECAUSE I know that I can buy and original, in good condition, for less.


Sorry THEN covid was in capitals, not covid 2016 is in the same sentence.


Yes you are in the position to be able to track down these things. I being new to the hobby, as you said, would find it more difficult. I look at the time i have left on this planet and i go and get what i want. I still need to be able to justify it to myself and don't just buy everything that takes my fancy, although it may seem like that to some.
I did spend my time as a younger man working two or three jobs, going without so i could put my family in front and they'd have what they needed and hopefully what they wanted before i worried too much about myself. I was still working overtime and on-call on the Council 5 years ago.




So, i bought the Fathom knowing it was beautiful, but very expensive. If i'd looked for a year or more i may have saved some money.


Just waiting on Bill to pick up my Judge Dredd, i had offers to sell me one between 5k and 9.5k. i settled on one just over 6k which i'm sure will make others say it's way to much and two years ago i could have gotten one for 3.5.


It's not two years ago but.


But back to the remakes.


In my position, unless the arse drops out of the market for a fairly rare and very desirable Bally Fathom, i have a 8-9k deposit already for an 11.5k brand new Haggis Fathom, that need not one cent spent on it to be showroom condition (mine is better than players, but needs a stencil/cab job and chrome) for 2-3k to upgrade.


It's a no brainer.


In your case, you have a Bally Fathom in original condition that you are perfectly capable of restoring yourself if you so wish, that you actually much prefer over a remake for 'purist' reasons, and your 'trade down' cost is over 9K. For you, this is also a no brainer. And if i was invested so lightly on mine i would also make the same decision as you and just keep it.


The newer collectors will be into the remakes, the guys in the States where Fathoms don't change hands as much and are harder to track down are going to be into it too.


In the nd there are only 250 being made, assuming they all sell before the 4 week window closes, so these will be much rarer than the Bally's. If they turn out to be better then watch what the pricing does in the second hand market over the next five years. It won't bother me, it will a relatives job to sell it in any case and hopefully not for a few years yet.


If they turn out to be shit do you want to get a mates discount on a HUO low plays Haggis? You can put a told you so sign in the backglass. %.% @@*


11.5k for a remake too, Stern pops out 4-5 titles a year (or so they plan). There's no love in any of them, look at the cab on Led Zepplin, but a premium so-so rushed machine is 12.5k currently. You have to take a chance on whether you like it, specially if the theme resonates and you want an LE as they sell out in hours and then if the title is really good they double in value.


I have to say, it's not the last pinball machine i'll ever sell if i could only keep one (Orbit 1), but my favourite machine to play out of the 25 i have is my Chicago Gaming Company Attack from MarsLE remake.
I know Dave from Belmont's favourite is his CGC Medieval Madness remake, and he has been collecting for many years too.


In the end, these manufacturers are choosing proven formula's for fun and beauty.
There are still companies designing their own machines too (including Haggis) and modern machines are getting more modern. My Gunners talks to the internet and is capable of doing it's own updates, it can post my scores on worldwide leader boards, it even takes video of me while I'm playing, adds me to the lineup on stage playing the song and puts it on the big screen for spectators to watch.


Best of both worlds for me please.


 
« Last Edit: May 06, 2021, 05:23:52 AM by punkin »
Looking for Bally Space Invaders, Stern Orbitor 1

Offline Pop Bumper Pete

  • Trade Count: (+4)
  • ******
  • Forum Posts:
  • Ballarat
Re: Remakes of Classics - Would you buy one ?
« Reply #24 on: May 06, 2021, 09:26:17 AM »
Punkin, different stroke for different folks
I like a collection like yours, different manufactures, different eras, game i have played, games i have not played
What leaves me cold is seeing a collection made up of nothing but remakes or LCD era games, to me it just screams "wannabe"

But that does not mean I hate new games. but what I would like to see is a little innovation. Remakes are not bringing anything new to pinball
Take a look at the golden era of Bally 1981. one company produced 8 games in that one year. each game had a unique feature. and 40 years on, these 8 games are still the most sort after in the pinball world

Offline punkin

  • Trade Count: (0)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Woolgoolga NSW
Re: Remakes of Classics - Would you buy one ?
« Reply #25 on: May 06, 2021, 09:49:44 AM »
That's the reason they are remaking them. The entire issue we are talking about is that Haggis has the rights to reproduce 5  Bally machines from 1981! !@#


I agree with what you say about collections. I see US gamerooms that are just 10 new sterns, not anything i'd be interested in collecting.


I'm refining my collection now i'm out of room, keeping the ones i truely love to play and sending all the ones i don't love quite as much to new homes where hopefully they'll be cherished, but at the least that more people will be exposed to them.


Orbit 1 is a classic case. I hear people call it a skidder all the time, but i love it to death.


The Fathom Mermaid edition, is the case in point as well, and as far as bringing anything new to the table, they are adding two LCD screens in the apron, they are adding a new code (as well as the original one) so you have two different games on the same playfield in the same machine.
They are adding glow in the dark reflective cabs. seems to me they are bringing innovation to the table.


They are also doing a standard edition for those who want a faithful (modern) reproduction with out the added extras.


I agree with you though, i would love to see my Attack From Mars have a second or third code and new sets of rules and callouts that i could switch back and forwards into, co-op mode, team challenges etc. would be fantastic and would extend the exploration period for me and make it a fun thing to do with families.
Perhaps CGC will take a leaf out of Haggis's book and start to implement this.


In the end, these boutique pinball companies aren't rich guys trying to capitalize on the re-emerging pinball market. They are pinheads like us, with ideas like us, and they are out there making their ideas come true.  If they make a good living out of it, good for them.


I really do understand the people who would rather the original, just hope those people understand me a bit too.
Looking for Bally Space Invaders, Stern Orbitor 1

Offline punkin

  • Trade Count: (0)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Woolgoolga NSW
Re: Remakes of Classics - Would you buy one ?
« Reply #26 on: May 06, 2021, 09:52:29 AM »
Could i also say, that i am enjoying the shit out of this respectful discussion, and i hope to learn more about my fellow pinheads and hopefully they may learn something about the newer collectors or those with different collection goals?
Looking for Bally Space Invaders, Stern Orbitor 1

Offline Pop Bumper Pete

  • Trade Count: (+4)
  • ******
  • Forum Posts:
  • Ballarat
Re: Remakes of Classics - Would you buy one ?
« Reply #27 on: May 06, 2021, 10:03:52 AM »

In the end, these boutique pinball companies aren't rich guys trying to capitalize on the re-emerging pinball market. They are pinheads like us, with ideas like us, and they are out there making their ideas come true.  If they make a good living out of it, good for them.


A good living?
I'd say a good part of the cost of one of these games is profit
BOM for this era Bally would be about $4000, nothing for existing artwork, $1000 for labor to put it together

Offline oldskool1969

  • Trade Count: (0)
  • ******
  • High Score Initials:
  • Forum Posts:
  • perth
Re: Remakes of Classics - Would you buy one ?
« Reply #28 on: May 06, 2021, 10:59:55 AM »
yeah but nah.
If it was, everybody would start and build pinball with this high a profit margin.
Yours is a very simplistic way to look at it.
With your background you should know there is a lot more to business than this.
By the way, what is wrong with profit? did you work for love.
This statement is just silly Peter. I am not having a go at you mate.




« Last Edit: May 06, 2021, 11:14:30 AM by oldskool1969 »
If it isn't broke, it isn't pinball.

Offline Pop Bumper Pete

  • Trade Count: (+4)
  • ******
  • Forum Posts:
  • Ballarat
Re: Remakes of Classics - Would you buy one ?
« Reply #29 on: May 06, 2021, 11:15:30 AM »
I guess I am just disappointed Haggis did not continue with original themes
« Last Edit: May 06, 2021, 11:57:05 AM by Pop Bumper Pete »