Here's some pics Chad that I hope will help.
Pic 1 shows the Millenium Falcon target above the drop targets . Note the 2 screws on the upper left hand side . These are the screws that hold the bracket for the plastic above it.
Pic 2 shows the back of the Millenium Falcon plastic and how the wiring for the 3 yellow lights comes through the gap in the clear plastic .
Pic 3 shows the underside of the plastic you are talking about and how it attaches.
The bracket itself is made from 1.5mm steel and measures 30mm x 22mm (the 30mm side is the side that attaches to the plastic with the 3 lights).
It has 2 holes drilled and tapped in it for the screws that hold it to the Millenium Falcon plastic . The threads are a 6-32 thread (the screws that hold it on are 6-32 x 3/8" long and have the Star washer under the head).
The plastic that has the 3 lights is held on to the bracket by rivets , as are the 3 lamp sockets but if you don't have the equipment to rivet it I guess you could easily screw them on.
Hope this info helps .
P.S - PM sent regarding the plastic .
