Solar ride system 1 Gottlieb - wire colour code (coin door)

[RaMpAgE]

I am trying to repair this machine and someone has added a credit button to the coin door and a switch to enable or disable it - but what I can see its all buggered up and wires go all over the place to the test switch, start button and back.  F#&k!
I need to get it back to normal but can't work out the wiring - I have the schematics but its a bit hard without the colour codes.
Its causing alot problems etc.

Point me in the right direction please.

Awaiting in anticipation

cheers

[Strangeways]

I think I have a copy of the manual at home. Usually, the color code will be on one of the pages - it is not usually on the door schematic.

[RaMpAgE]

great, the play/test, coin chute #1, coin shute #2 and replay switch wires are the ones I need.  Only one I know is gound is white/black/blue.

thanks

[The pinballist formally known as Dean Morgan]

great, the play/test = Brown/Blk/Blk, coin chute #1 = Brown/Red/Red, coin shute #2 = Brown/Orange/Orange and replay switch = Brown/Yellow/Yellow wires are the ones I need.  Only one I know is gound is white/black/blue.

thanks

See Above, Cheers Dean

PS Here is the link: http://www.pinrepair.com/sys1/bottom2.gif

[RaMpAgE]

Thanks Dean.  Will rewire.

[RaMpAgE]

I shorted the MPU somehow while trying to fix this F***ing machine.  Now its toast.  Its the Nuwumph board too.

[ajlaird]

Ouch - there are some guys on here who are very good at fixing boards, might be worth a shot as it would probably be cheaper than replacing it.

[RaMpAgE]

Ken fixed it for me and is working again - I'll be more careful next time.