FIREPOWER PARTS

[ddstoys]

Well ive taken on a big project to try and save a great game.    Bought this playfield from Mark yesterday with the grand plan of building complete machine from the playfield and spare parts i have lying around.   So any help would be greaty appreciated.

So far i have a 90% complete playfield. Empty cabinet with most of the loom.  Untested CPU untested driver board and an untested Power supply.   Headbox loom and transformer.  

So far i need

Any williams sys3-6 Headbox with display panel. (SOURCED)  
Master display and 4 displays (dead or alive)(MASTER DISPLAY SOURCED STILL NEED SINGLE DISPLAYS OR PCBS)      
Soundboard with speech, (SOURCED) THANKS KEN
Spinner and parts (any game s\is fine)
Slingshot plastics,    (SOURCED THANKS DEAN)
Bumper caps,    (SOURCED) THANKS MARCO
left stainless guide beside the flippers.
Backglass any condition
Lower CPU bracket  (SOURCED)
2 x 3 bank drop targets (SOURCED) THANKS MARTY AND JEFF
ball save coil and mech from the left outlane  (SOURCED THANKS MARK C) 
wiring conectors between the Master display and single displays for the 1player displays (MADE ONE FROM JAMMA CONNECTORS) 
2X COIL PLUNGERS AND THE FLAT PLATE THA LIFTS THE DROP TARGETS (SOURCED tHANKS kEN) 
1X COIL BRACKET THAT HOLDS THE COIL TO THE DROP TARGETS AND HOLDS THE SPRINGS FROM THE DROP TARGETS (SOURCED tHANKS kEN)

 If you have any of these parts you could spare let me know.


   This is a longterm project as i work out what else i need ill let you know


    Thanks Daniel

[pinnies4me]

a big project

You said it Daniel!!

You know where there's one any time you need to check anything mate. Best of luck with the hunt.

[The pinballist formally known as Dean Morgan]

I have some parts from FP I had years ago, not much but its yours..PM sent

[ddstoys]

WOULD ANYBODY HAVE THE LOVER CPU BRACKET FROM A WILLIAMS SYSTEM 3-6?   WAS GOING TO START MOUNTING THE FINISHED BOARDS BUT IM MISSING THAT BRACKET   

[Retropin]

Scrapped a FLASH years ago... it has helped MANY machines come to life since then... i have quite a few of the metal brackets on PF, plus other bits and bobs that are all hardware... gladly donate them.. what you dont use, keep and maybe theyll have a use one day

[The pinballist formally known as Dean Morgan]

Slingshot plastics were posted today Daniel.

[ddstoys]

That would be great gav.  Pm sent

Thanks Dean

And as always thanks Nick ill be needing your help for sure

[ddstoys]

Thanks Dean the slings arrived today

And thanks Ken the ROMS also arrived today 

[deadlydave]

Daniel,
With regard to lane guide, are you wanting the missing one on the right?
Cheers
Dave

[ddstoys]

Yeah mate thats the one...

 I also just noticed im missing the ball save mech from the left drain anyone have one of them?

Im also thinking of converting to drop target if anyone has ant 3 target williams mechs let me know.   I figure we have a firepower in geelong with targets lets get one with drop targets aswell

[deadlydave]

Is the right lane guide the same part as on Gorgar?

[ddstoys]

As far as i know they are the same

[pinballnz]

My mate and I stripped a couple of these games.  Keep your list up to date and I will get my mate to dig the parts outs out.
Regards
Clive

[ddstoys]

Thanks Clive I'll keep updating the above list and thanks everyone for offers of help

[deadlydave]

I can send you my old right lane guide off Gorgar, if you want it, metal is a bit beaten from ball on lower edge, here is a pic.