Author Topic: Firepower Playfield up rebuild  (Read 6731 times)

0 Members and 6 Guests are viewing this topic.

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Firepower Playfield up rebuild
« Reply #90 on: November 29, 2010, 09:16:41 PM »
Ive started to prep the cabinet for the respray. Its been stripped down to bare bones side rails removed etc.   Ive drilled and dowelled the holes from the nails.
    The head has been stripped and given a coat of primer but the weather turned to shit Bloody rain

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Firepower Playfield up rebuild
« Reply #91 on: November 29, 2010, 09:19:43 PM »
Forgot to mention that Timbo has laid the first coat of clear on the playfield but i have not seen the results yet...

Offline pinnies4me

  • Administrator
  • Trade Count: (+5)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Victoria
Re: Firepower Playfield up rebuild
« Reply #92 on: November 29, 2010, 09:55:35 PM »
Forgot to mention that Timbo has laid the first coat of clear on the playfield but i have not seen the results yet...

If the work he's done on the ES is anything to go by you will be pleased!
“If you wanna escape, go up to a pinball machine. There’s a magic button on the front that takes you to a world under the glass and makes the the rest of the universe disappear.”

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Firepower Playfield up rebuild
« Reply #93 on: November 29, 2010, 10:36:14 PM »
Forgot to mention that Timbo has laid the first coat of clear on the playfield but i have not seen the results yet...

If the work he's done on the ES is anything to go by you will be pleased!

   There is no Doupt in my mind....   It's gunna be awsome sure looking forward to seeing it

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Firepower Playfield up rebuild
« Reply #94 on: January 17, 2011, 11:53:02 AM »
OFF work again todayso over being sick but gives me time to post what little work ive done lately.

   Got the flash cabinet stripped and primed and also gave the head its first coat of black.   my aim was to fix and graffiti but try and leave the wood grain visible will find out how i went once i apply top coat to the cabinet i guess.


Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Firepower Playfield up rebuild
« Reply #95 on: January 17, 2011, 11:55:55 AM »

Looking good Daniel. Are you using spray cans or a compressor for your painting ?
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Firepower Playfield up rebuild
« Reply #96 on: January 17, 2011, 11:57:58 AM »
Ive used compressor for the undercoat.   but spray cans for the color.

Offline Prmailers

  • Trade Count: (0)
  • *
  • Forum Posts:
  • High Bridge, NJ USA
Re: Firepower Playfield up rebuild
« Reply #97 on: February 07, 2013, 12:18:42 AM »
Great work.

Quite a project.

How did it turn out?

Was anything ever worked out for the section of wear by the right slingshot?


Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Firepower Playfield up rebuild
« Reply #98 on: February 07, 2013, 08:27:54 PM »
The machine has not progressed from this stage I really must get my playfield back and finish this one off. 

  Thanks for the reminder lol

mark jackson

  • Guest
  • Trade Count: (0)
Re: Firepower Playfield up rebuild
« Reply #99 on: February 22, 2013, 01:50:22 PM »
Hi Daniel,  .... Just want to encourage you to keep at it. .... The Kings & Queens I built from just a playfield took me over 2 years to complete. As you may recall, you helped me more than a few times with different parts I was after. I remember that there were many times when I thought I was never going to get the job done but ..... 2 years only takes 2 years to pass and eventually I did finish the job. I know that you've done great work in the past, and I'm sure that this one will get done too. Patience is hard for us all, as we are all probably a bit impatient at heart. I haven't been doing any pinballs for about a year. ... I have my house to paint! I hope you are in good health. Kind regards, Mark

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Firepower Playfield up rebuild
« Reply #100 on: February 22, 2013, 01:57:00 PM »
Hi Daniel,  .... Just want to encourage you to keep at it. .... The Kings & Queens I built from just a playfield took me over 2 years to complete. As you may recall, you helped me more than a few times with different parts I was after. I remember that there were many times when I thought I was never going to get the job done but ..... 2 years only takes 2 years to pass and eventually I did finish the job. I know that you've done great work in the past, and I'm sure that this one will get done too. Patience is hard for us all, as we are all probably a bit impatient at heart. I haven't been doing any pinballs for about a year. ... I have my house to paint! I hope you are in good health. Kind regards, Mark

Great post Mark - Even little bit of encouragement helps. My Pro Football took be almost 4 years to finish. But it was well worth the effort - same a Kings and Queens  *%*
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Firepower Playfield up rebuild
« Reply #101 on: May 20, 2014, 12:49:55 AM »
Haha well this thread has laid dormant for long enough who thinks its time to hassle Eltimbo about my Playfield?

Offline goodolddays

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Riverstone NSW
Re: Firepower Playfield up rebuild
« Reply #102 on: May 20, 2014, 07:45:39 AM »
Haha well this thread has laid dormant for long enough who thinks its time to hassle Eltimbo about my Playfield?

Absolutely .. we need to see this finished and more importantly you need to be able to play it !
Can't wait to see what Tim has done to your PF.
I need more room ! and more $$$

Offline TUF-427

  • Trade Count: (+1)
  • *****
  • Forum Posts:
  • Brisbane Queensland Australia
Re: Firepower Playfield up rebuild
« Reply #103 on: May 21, 2014, 10:51:01 AM »
Haha well this thread has laid dormant for long enough who thinks its time to hassle Eltimbo about my Playfield?

Yep Hassle him Daniel about time this came back to life!
Firepower, F14 Tomcat, Terminator2, Twilight Zone, No Fear, TAF, Hyperball, Sttng....