Hi Nino
When you stripped the cab did you use paint stripper or just sanding as you have taken it right back
Also the back pannel you will have to drill holes for leg bolts I rember seeing a jig on another post for accurate drilling It would be handy for what you need
Howzat
Bunnings don't stock "Citrus Strip" anymore. I used the "Diggers low odor", which is just as good. I use the stripper to remove the bulk of the paint, then I leave the cabinet in the sun for a day to ensure it is dry. I then use an orbital sander with 180 Grit to remove the paint that is left over. Once that is done, I tidy up any defects and then sand the cabinet again. I'll wait for the weather to improve before painting the primer / filler.
I vaguely remember a jig for doing the holes.
