Ok been pressing on with this got a fair bit done over the Easter break ,
I want it basically in one piece before I move house in a few weeks,will attack the cabinet at a later date...
Pics below depict the order I did the Playfield underside rebuild,seemed to work out ok...
1- Remount all the underside hardware ,wire clips and 4 new complete flipper mechs (old ones were only good for spare parts)
2- reinstall the switch Matrix loom and all targets/switches
3- reinstall lamp harness with Leds for all controlled inserts
4- Solenoid and Flasher loom and resolder all connections
