Here is a el wire ramp mod and train mod and does a heap of other mods for the recent pins all for sale
Pinsider HemiOrange09
I have been asked by a few Pinside Members to sell these mods for the AC/DC machines, I am just seeing it there are others that want his mod for their machines.... This kit is 100% plug-in-play and runs off from a sound activation to make them pulse. There is a manual sensitivity adjustment on it, so if the machine is soft or Cranked up they will look the same with a quick adjustment. You can mount the EL wires two ways on your machine, using zip ties and drilling holes in the ramps or very clear packing tape works great and that is what I did on my Pro machine. I had used 5mm in this Pro and I am thinking going with a 2.6mm for this mod, the 5mm was a little hard to run and make the turns on the ramps. This kits will be about $135.00 shipped and I just want to see first if anyone want is before I wire up the directions. Post here or shoot me a PM if you would like a set of these for your machine
Sorry to show the video again but I know not everyone has seen it and will ask for it....
utoplay=1&rel=0
thread link is here
http://pinside.com/pinball/forum/topic/any-interest-in-these-acdc-el-wire-ramp-mods-for-about-135ish
