A little progress..
I have managed to find a 1976 Fantasy schematic and hope this will help a little in the future. Fantasy has pretty much the same playfield features so I am assuming the circuits will be at least similar.

Re rubbered the machine and got rid of the clouts

Pulled the flipper assemblies and polished the corrosion off the coil plunger. I will swap these with the old ones off my skylab as they are in pletty good nic (identical but will have to turn them down to length on the lathe)

I managed to get the machine working by soldering jumpers across the bad connector. Easy fix and reversable mod. I will just have to desolder to move the machine as I have to take off the headbox to get it into and out of the games room.



Just have to order a new ball and some nylon flipper coil sleeves. Both my machines have to share a ball for now.

Big smiles and a couple dozen games later whats next?

There are a few lights out on the playfield and a few switches could do with adjusting (pop bumper trigger, 2 of the targets, ect).
The lamp sockets are all rusty while most other things are like new....obviously of incredibly low quality. I'll get stuck in and see if I can get these sorted tonight so I can start on the cosmetics.