Time for an update

The MPU is finished. Battery is installed and I replaced the pins that needed to be done.





The coin door was completed some time ago, but the coin chutes themselves were very rusted. I cleaned them on the wire wheel, primed them and then painted them with the same paint that I used for the rest of the door. They should be chrome, but I think it looks great "as is".





Drop Targets

The drop target bank needed a rebuild as the targets themselves were worn and the plunger was corroded beyond repair. I ordered a new plunger and coil sleeve. Heres some "before" pictures ;





Bit of surface corrosion





Everything is cleaned and buffed. New targets are ready to be installed





After a couple hours work, we are finished !








Heres a progress picture of the cabinet of the machine. I picked up a new playfield glass off Dave (Silverball) that tony bought and installed it. Made a HUGE difference. Almost done !