Author Topic: Interview with George Gomez (Stern)  (Read 1768 times)

0 Members and 1 Guest are viewing this topic.

Offline PinballMagazine

  • Trade Count: (0)
  • ****
  • Forum Posts:
  • www.pinball-magazine.com
    • Pinball Magazine
Interview with George Gomez (Stern)
« on: June 30, 2014, 05:36:02 AM »
While a lof of attention has been going to Santiago Ciuffo’s PINBALL book, of which a new batch of orders will ship the first week of July, Pinball Magazine has also been working on interviews for Pinball Magazine No. 3. In the fall of 2013 Pinball Magazine sat down with George Gomez, Stern’s Executive Vice President of Game Design. George has been designing all sorts of things since the late ‘70s, including very popular pinball machines such as Monster Bash, Revenge From Mars, Lord of the Rings and more recently Transformers and Avengers.

While this interview was intended to be published in Pinball Magazine No. 3, it is now published separately in between Issues, since Issue 3 is taking longer than anticipated. New questions have been submitted to George in order to publish a more up-to-date interview and George was kind enough to answer these as well. They have been edited into the original interview.

Please note that this interview does not focus on George’s career in pinball design, as we’d prefer to do that as a cover story at some point in the future. Instead the interview focusses on George’s current position at Stern Pinball and new developments in the pinball industry.

You can download the PDF file of the interview on http://www.pinball-magazine.com. Enjoy!
Managing editor of Pinball Magazine: www.pinball-magazine.com

Offline Homepin

  • Trade Count: (+15)
  • ******
  • Forum Posts:
  • Not a business - A Passion!
Re: Interview with George Gomez (Stern)
« Reply #1 on: June 30, 2014, 02:01:52 PM »
Jonathon, is the PDF OK as I get the following error message when I try to open it......maybe the problem is at my end?

Replacement Pinball PCBs that remain faithful to the originals

Offline skywalker

  • Trade Count: (+2)
  • ******
  • High Score Initials:
  • Forum Posts:
  • melbourne
Re: Interview with George Gomez (Stern)
« Reply #2 on: June 30, 2014, 02:43:34 PM »
link seems ok for me

Offline Homepin

  • Trade Count: (+15)
  • ******
  • Forum Posts:
  • Not a business - A Passion!
Re: Interview with George Gomez (Stern)
« Reply #3 on: June 30, 2014, 02:48:26 PM »
link seems ok for me

OK - thanks - I'll try and download it again
Replacement Pinball PCBs that remain faithful to the originals

Offline Homepin

  • Trade Count: (+15)
  • ******
  • Forum Posts:
  • Not a business - A Passion!
Re: Interview with George Gomez (Stern)
« Reply #4 on: June 30, 2014, 02:54:57 PM »
link seems ok for me


downloaded again but same issue - corrupted file??? Beats me
Replacement Pinball PCBs that remain faithful to the originals

Offline Homepin

  • Trade Count: (+15)
  • ******
  • Forum Posts:
  • Not a business - A Passion!
Re: Interview with George Gomez (Stern)
« Reply #5 on: June 30, 2014, 04:16:29 PM »
Thanks to a member who emailed it to me.... ^^^
Replacement Pinball PCBs that remain faithful to the originals

Offline Dann36

  • Trade Count: (+1)
  • ***
  • Forum Posts:
Re: Interview with George Gomez (Stern)
« Reply #6 on: June 30, 2014, 04:29:00 PM »
Having the same issue, download and says cannot open pdf file..  Tried two different readers with the same result..

Those who are able to open, can you tell me what reader your using ?

Offline GORGAR 1

  • Trade Count: (0)
  • ******
  • High Score Initials:
  • Forum Posts:
  • BROOKFIELD-MELBOURNE
Re: Interview with George Gomez (Stern)
« Reply #7 on: June 30, 2014, 05:02:08 PM »
Downloaded ok for me on iPad

Offline Homepin

  • Trade Count: (+15)
  • ******
  • Forum Posts:
  • Not a business - A Passion!
Re: Interview with George Gomez (Stern)
« Reply #8 on: June 30, 2014, 09:49:58 PM »
Having the same issue, download and says cannot open pdf file..  Tried two different readers with the same result..

Those who are able to open, can you tell me what reader your using ?


I tried two computers - one running XP pro and the other Win8 and two readers on each - Foxit and Adobe and it simply wouldn't open.

I ran the file through an online PDF repairer and it fixed most but many lines were missing.

I suspect Jonathan is an "Apple Boi" and this could be where the problem lies - which reminds me of a joke....................



A couple with a newborn were discussing the new babies name with friends

The friends cried "but WHY would you call her Apple? - she won't be compatible with ANY kids in the playground"




Hahahahahaaha
Replacement Pinball PCBs that remain faithful to the originals

Offline GORGAR 1

  • Trade Count: (0)
  • ******
  • High Score Initials:
  • Forum Posts:
  • BROOKFIELD-MELBOURNE
Interview with George Gomez (Stern)
« Reply #9 on: June 30, 2014, 09:59:39 PM »
Having the same issue, download and says cannot open pdf file..  Tried two different readers with the same result..

Those who are able to open, can you tell me what reader your using ?


I tried two computers - one running XP pro and the other Win8 and two readers on each - Foxit and Adobe and it simply wouldn't open.

I ran the file through an online PDF repairer and it fixed most but many lines were missing.

I suspect Jonathan is an "Apple Boi" and this could be where the problem lies - which reminds me of a joke....................



A couple with a newborn were discussing the new babies name with friends

The friends cried "but WHY would you call her Apple? - she won't be compatible with ANY kids in the playground"




Hahahahahaaha

Here we go again you always have trouble trying to open these  *!@ :-) your doing a great job making a pin but you can't open a PDF lol

Offline PinballMagazine

  • Trade Count: (0)
  • ****
  • Forum Posts:
  • www.pinball-magazine.com
    • Pinball Magazine
Re: Interview with George Gomez (Stern)
« Reply #10 on: July 05, 2014, 12:43:40 AM »
Actually the PDF was generated on my Windows 7 laptop. I had no issues opening the pdf on my computers. If anyone knows what the problem is, I'd like to hear it as well :)
Managing editor of Pinball Magazine: www.pinball-magazine.com