Author Topic: easiest way to pop pcb's out of standoffs  (Read 1454 times)

0 Members and 1 Guest are viewing this topic.

Offline pinball god

  • Trade Count: (+1)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • Metallica is here to stay
easiest way to pop pcb's out of standoffs
« on: January 19, 2015, 10:12:28 PM »
I recall seeing a plastic tool to easily pop pcb's off stand offs. Can't find them now. Is there something I can manufacture a tool from or is there a method to pop these out? Using thin pliers can be difficult.
Still loving my Metallica Premium

Offline Dann36

  • Trade Count: (+1)
  • ***
  • Forum Posts:
Re: easiest way to pop pcb's out of standoffs
« Reply #1 on: January 19, 2015, 11:29:14 PM »
You can buy them but its just a  plastic or brass tube that you push over the standoff and lift the board at the same time.They were included in some older machines. A gutted pen ( just the hollow tube ) is just a little to big but it does work.

They are a few dollars to buy but just as easy to find a tube with the correct diameter that fits over the end.

http://www.pbresource.com/tools.html
7 or so pics down labled as circuit board remover tool

Offline Homepin

  • Trade Count: (+15)
  • ******
  • Forum Posts:
  • Not a business - A Passion!
Re: easiest way to pop pcb's out of standoffs
« Reply #2 on: January 19, 2015, 11:35:04 PM »
I made this for pin removal BUT the same thing applies - get a piece of suitable sized brass tubing from a hobby shop and stick it in a handle:

Replacement Pinball PCBs that remain faithful to the originals

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: easiest way to pop pcb's out of standoffs
« Reply #3 on: January 20, 2015, 12:22:14 AM »
I made this for pin removal BUT the same thing applies - get a piece of suitable sized brass tubing from a hobby shop and stick it in a handle:



simple, yet effective.

Rob - on your next visit - remind me to give you one of mine - I have plenty.
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline pinball god

  • Trade Count: (+1)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • Metallica is here to stay
Re: easiest way to pop pcb's out of standoffs
« Reply #4 on: January 20, 2015, 06:56:12 PM »
Thanks Nino, will do.
Still loving my Metallica Premium