Ive been supplying computer cut stencils to a few people for cabinet restoration. All vectorised files are made by myself by hand tracing existing cabinet artwork with a computer. This gives extremely accurate reproductions of existing artwork.
Im now in a position to offer these to anyone who may need them. Prices are kept as low as possible.
Stencils are for a one off application and are cut from masking vinyl. Each colour has its own template, directions for order of colour added are supplied.
previously, i have been using one type of masking vinyl, but seeing as most people use standard house acrylic as the base colour of the cabinets, ive done some research and have come up with another type of mask to use.
New mask is thicker than previous and is slightly absorbant. This reduces the risk of bleed dramatically as the paint is absorbed through the edges of the mask, not underneath it.
This mask is slightly more expensive than the previous.
But it does allow me to offer 2 types of mask.
For those using enamel or automotive acrylic and as such have a perfectly smooth surface can order standard mask.
If using standard acrylic then absorbant mask is required.
These stencils are made to order. if anyone has such a requirement then please contact me through this forum.
please bear in mind that i already have a backlog of orders that MUST be finished before any new ones can be made, as such there is a short waiting list.
results of stencils can be seen below.
Thanks - Retropin
