« previous next »
Pages: [1] 2   Go Down

Author Topic: Williams TIME WARP project machine  (Read 1203 times)

0 Members and 3 Guests are viewing this topic.

Offline The pinballist formally known as Dean Morgan

  • Trade Count: (+3)
  • ******
  • Forum Posts:
    • Berwick Vic
Williams TIME WARP project machine
« on: September 05, 2009, 07:46:59 PM »
Ok, I have started what I will call a PARTIAL restore of a Williams Time Warp Pinball.

What do I mean by partial restore?  Well this machine will be sold on eBay in a few weeks.  It will be sold as complete and working, however, will still need some TLC.  So I am doing the electrical and electronic repairs, general clean etc.

Here is what I have done so far:
*Cabinet cleaned inside and out
*Brand New Power Lead fitted
*Playfield quick clean (can be fully stripped, by purchaser if they choose)
*Blown Globes replaced
*Rubbers Replaced

I still need to do:
*Clean backbox inside and out
*Fit Transformer in backbox
*Fit New Capacitor and two bridge rectifers in back box
*Install power supply board in backbox (have a fully working board)
*Install Sound Board in Back Box (have a fully working board)
*Repair and then Install CPU in back box
*Repair and then install Driver board in back box
*Re-install playfield (has been cleaned and re-rubbered)
*Install missing diagnostic buttons to coin door
*Install missing playfield target reset arms
*Install Displays
*Install Backglass





Hope to have this listed for sale on Ebay in about 2 -4 weeks

Cheers
Dean
« Last Edit: September 05, 2009, 07:58:32 PM by The pinballist formally known as Dean Morgan »
Logged
Im a Gottlieb Man - System 1 & 80 Rock

Offline illawarra_steelers

  • Read-Only
  • Trade Count: (0)
  • *
  • Forum Posts:
    • Illawarra, NSW
Re: Williams TIME WARP project machine
« Reply #1 on: September 05, 2009, 08:07:49 PM »
Dean,

Looks like a nice solid project?

Why not offer it for sale here rather than eBay?
Logged

Offline jyebow

  • Trade Count: (0)
  • *****
  • Forum Posts:
    • Maitland, NSW
  • GTB Pioneer, Bally Hi-Lo Ace, WMS Space Shuttle,
Re: Williams TIME WARP project machine
« Reply #2 on: September 05, 2009, 08:13:10 PM »
Quote from: illawarra_steelers on September 05, 2009, 08:07:49 PM
Dean,

Looks like a nice solid project?

Why not offer it for sale here rather than eBay?

I agree, There would be plenty of interested members here.
+ ebay wouldn't get any $.
Cheers Steve
Logged
GTB Pioneer, Bally Hi-Lo Ace, WMS Space Shuttle, Data East Lethal Weapon 3

Offline The pinballist formally known as Dean Morgan

  • Trade Count: (+3)
  • ******
  • Forum Posts:
    • Berwick Vic
Re: Williams TIME WARP project machine
« Reply #3 on: September 05, 2009, 08:50:50 PM »
Another Photo

Logged
Im a Gottlieb Man - System 1 & 80 Rock

Offline The pinballist formally known as Dean Morgan

  • Trade Count: (+3)
  • ******
  • Forum Posts:
    • Berwick Vic
Re: Williams TIME WARP project machine
« Reply #4 on: September 05, 2009, 08:56:02 PM »
And yet another

Logged
Im a Gottlieb Man - System 1 & 80 Rock

Offline The pinballist formally known as Dean Morgan

  • Trade Count: (+3)
  • ******
  • Forum Posts:
    • Berwick Vic
Re: Williams TIME WARP project machine
« Reply #5 on: September 05, 2009, 08:59:28 PM »
And Another....



Will post more as I progress..
Logged
Im a Gottlieb Man - System 1 & 80 Rock

Offline GORGAR 1

  • Trade Count: (0)
  • ******
  • High Score Initials:
  • Forum Posts:
    • BROOKFIELD-MELBOURNE
Re: Williams TIME WARP project machine
« Reply #6 on: September 05, 2009, 11:11:23 PM »
Wow nice machine-but I am a TW fan..

Peter
Logged

Offline The pinballist formally known as Dean Morgan

  • Trade Count: (+3)
  • ******
  • Forum Posts:
    • Berwick Vic
Re: Williams TIME WARP project machine
« Reply #7 on: September 06, 2009, 10:17:09 AM »
So what more will the purchaser need to do? Nothing if they dont want to, plug in and play!!

But if it were a keeper, for me I would:

*The playfield has some corrosion on metal components both on top of the playfield and under.  If I had time and were keeping the machine I would purchase some metal components for top of playfield.  Such as ball gates and screws that hold posts down etc.  All readily available.
*Under playfield could do with some compnents being removed and having NINOs ranex treatment.  All work but rust is on some items.
*Coin door internals need ranex and sanding/buffing.
*One playfield plastic (top right hand ball arch) is missing.  I have a scan (thanx FIREPOWER - David) and will print, laminate and cut to size as a temp.  These plastics do come up on eBay etc.  So the buyer just needs to keep a keen eye out.
*Backglass is very average 5/10.  Im sure there must be one hanging in someones games room that they want to sell??  Anyway, buyer would want to keep an eye out for one if it comes along.
*The apron is rusty, needs sanding back, spray paining and decal installed.

Thats it...

Will post some more pictures this arvo...although I only have an 1-2 hours to work on it today.

Dean
« Last Edit: September 06, 2009, 12:52:10 PM by The pinballist formally known as Dean Morgan »
Logged
Im a Gottlieb Man - System 1 & 80 Rock

Offline The pinballist formally known as Dean Morgan

  • Trade Count: (+3)
  • ******
  • Forum Posts:
    • Berwick Vic
Re: Williams TIME WARP project machine
« Reply #8 on: September 06, 2009, 10:20:18 AM »
Quote from: illawarra_steelers on September 05, 2009, 08:07:49 PM
Dean,

Looks like a nice solid project?

Why not offer it for sale here rather than eBay?

Hi Tony,

In short, I could do with the $$$$.

Thought eBay might bring more cash.  Its a open market so should go for what people are willing to pay.

Happy to sell to member if anyone is interested.  But looking for offers around $700-800.

If not sold, I will put on eBay, statring at $500.00 (parts alone, working boards etc gotta be worth that??)

Interested parties PM me your email address and I will send pics.  Once you have seen pics you can make me an offer.  First in with an offer that I am willing to accept gets it.  But dont give me a price till you have seen photos.

Dean
« Last Edit: September 06, 2009, 10:22:30 AM by The pinballist formally known as Dean Morgan »
Logged
Im a Gottlieb Man - System 1 & 80 Rock

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Geelong
Re: Williams TIME WARP project machine
« Reply #9 on: September 06, 2009, 10:23:19 AM »
Shouldnt have any troubles getting that for it dean  ^^^  If i had the room it would already e sold
Logged

Offline The pinballist formally known as Dean Morgan

  • Trade Count: (+3)
  • ******
  • Forum Posts:
    • Berwick Vic
Re: Williams TIME WARP project machine
« Reply #10 on: September 07, 2009, 09:46:17 PM »
Update:

Heres some more pics:



IF I HAD TIME THE MYLAR WOULD COME OFF AS THE PLAYFIELD IS GOOD UNDERNEATH



« Last Edit: September 07, 2009, 10:11:03 PM by The pinballist formally known as Dean Morgan »
Logged
Im a Gottlieb Man - System 1 & 80 Rock

Offline GORGAR 1

  • Trade Count: (0)
  • ******
  • High Score Initials:
  • Forum Posts:
    • BROOKFIELD-MELBOURNE
Re: Williams TIME WARP project machine
« Reply #11 on: September 07, 2009, 11:58:21 PM »
Man she's covered in rust-must have spent alot of its life outside?? Nice project pin there??

Peter
Logged

Offline ajlaird

  • Trade Count: (0)
  • ******
  • Forum Posts:
    • Greensborough, Melbourne
  • Go Ahead, Make My Day
Re: Williams TIME WARP project machine
« Reply #12 on: September 08, 2009, 09:23:23 PM »
Yay, banana flippers - didn't realise these were standard with Time Warp.
Logged

Offline MartyJ

  • Trade Count: (+4)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Melbourne
Re: Williams TIME WARP project machine
« Reply #13 on: September 08, 2009, 09:33:24 PM »
Looking great Dean.  I'm yet to play a TW but cool flippers!
Logged

Offline pinnies4me

  • Administrator
  • Trade Count: (+5)
  • *****
  • High Score Initials:
  • Forum Posts:
    • Victoria
Re: Williams TIME WARP project machine
« Reply #14 on: September 08, 2009, 11:50:46 PM »
Quote from: ajlaird on September 08, 2009, 09:23:23 PM
Yay, banana flippers - didn't realise these were standard with Time Warp.

Apparently they left the factory some with banana flippers, some with "normal" flippers - about half of each version. Apparently they found on test that **girls** preferred the banana flippers! No idea why?? If you don't believe me I'll try and find the quote from Barry Ossler.
Logged
“If you wanna escape, go up to a pinball machine. There’s a magic button on the front that takes you to a world under the glass and makes the the rest of the universe disappear.”
Pages: [1] 2   Go Up
« previous next »