Just thought I would share a couple of photos of some work I've done recently. I have been very busy of late finishing off some customers machines but I've been trying to squeeze in some work for my own games.
I recently picked up an Addams from NSW (project) but I'm very happy as it works 100%, is complete, no hacks or issues. The existing playfield has some very minor insert wear, but this is the reason I purchased the machine. I was down at PBSP and purchased an Addams playfield (one of the remaining ones) from Mark & Damien. The screen printed artwork was fine and no major issues. The clear coating was not quite up to my standards so I wet sanded the imperfections out and gave the playfield another 3 coats of clear. The photos of the clear are 'straight off the gun', so in a few weeks I will give the playfield a further sand before its final cut and polish.
The clear is a 2pac automotive clear and should protect the playfield well for the rest of its life.
