Author Topic: Raised Playfield Inserts  (Read 254 times)

0 Members and 1 Guest are viewing this topic.

Offline JurassicP

  • Trade Count: (0)
  • **
  • Forum Posts:
Raised Playfield Inserts
« on: November 15, 2010, 12:56:49 PM »
Ok getting more comfortable with my Getaway after cleaning it and installing some LED's (Comfortable does not = confident). Have not fully stripped it down yet, but have removed some plastics etc etc..

Anyway I noticed a couple of inserts are seriously raised and was wondering how to fix this?

all suggestions gratefully received.

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Raised Playfield Inserts
« Reply #1 on: November 15, 2010, 01:04:05 PM »
You could try heating it up from underneath with a hair dryer and gently tapping it back into place with a flat block of wood

Offline pinnies4me

  • Administrator
  • Trade Count: (+5)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Victoria
Re: Raised Playfield Inserts
« Reply #2 on: November 15, 2010, 01:08:03 PM »
You could try heating it up from underneath with a hair dryer and gently tapping it back into place with a flat block of wood

+1. The glue seems to soften with heat. You can use a nice smooth block on the playfield, and tap that with a hammer until level.
“If you wanna escape, go up to a pinball machine. There’s a magic button on the front that takes you to a world under the glass and makes the the rest of the universe disappear.”

Offline JurassicP

  • Trade Count: (0)
  • **
  • Forum Posts:
Re: Raised Playfield Inserts
« Reply #3 on: November 15, 2010, 09:31:39 PM »
Thanks will borrow the hairdryer on the weekend then.

Did not think it would be too hard but wanted to at least ask first.

Cheers $!&

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Raised Playfield Inserts
« Reply #4 on: November 15, 2010, 10:58:03 PM »
 Always pays to double check saves stuffing up