Author Topic: terminator  (Read 1295 times)

0 Members and 3 Guests are viewing this topic.

Offline howzat

  • Trade Count: (0)
  • *****
  • Forum Posts:
terminator
« on: November 30, 2010, 10:44:17 PM »
Terminator  tr2

 what $ is a nice one worth   I have no pics.  I went to look at 1 today it has  just come from a pub and it has been tested with new rubbers and playfeild cleaned  and new balls   installed  over all its in nice condition   Im looking at it for my mate and he is asking $3000.00   For this game 3000.00 seams to be about right  Any advice would be good    

                                                                        Thanks Howzat

Offline Retropin

  • Trade Count: (+4)
  • ******
  • Forum Posts:
Re: terminator
« Reply #1 on: November 30, 2010, 11:00:50 PM »
Bit high mate... can get a SPIRIT for 2/3rds that these days

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: terminator
« Reply #2 on: November 30, 2010, 11:30:13 PM »
if the game is fully working and the playfield and cabinet are in good condition sounds like a fair price but ifbits flogged out I'd walk away

Offline pinnies4me

  • Administrator
  • Trade Count: (+5)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Victoria
Re: terminator
« Reply #3 on: November 30, 2010, 11:40:27 PM »
if the game is fully working and the playfield and cabinet are in good condition sounds like a fair price but ifbits flogged out I'd walk away

+1

I've seen some sell in the mid-2's, 3K seems right if it's very neat.
“If you wanna escape, go up to a pinball machine. There’s a magic button on the front that takes you to a world under the glass and makes the the rest of the universe disappear.”

Offline Ant68

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Brisbane
Re: terminator
« Reply #4 on: December 01, 2010, 12:30:18 AM »
if the game is fully working and the playfield and cabinet are in good condition sounds like a fair price but ifbits flogged out I'd walk away

+1

I've seen some sell in the mid-2's, 3K seems right if it's very neat.

+1 ,T2 generally are a well played pin , check for play field wear .
My mate run's the Time Zones  up this way ,he was telling me in it's hey days T2 was the biggest money earner out of all his pins .

Offline Mr Pinbologist

  • Trade Count: (+5)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Wauchope NSW
Re: terminator
« Reply #5 on: December 01, 2010, 12:35:14 AM »
if the game is fully working and the playfield and cabinet are in good condition sounds like a fair price but ifbits flogged out I'd walk away

+1

I've seen some sell in the mid-2's, 3K seems right if it's very neat.

+1 ,T2 generally are a well played pin , check for play field wear .
My mate run's the Time Zones  up this way ,he was telling me in it's hey days T2 was the biggest money earner out of all his pins .


I remember vividly the day when the old Pinball Parlor in Port Macquarie got a brand new T2.. people lining up to play it *%*
Before that place closed down recently, the owner told me that that game took $900 in the first day!! I reckon it must've nearly paid for itsself in about one week!

Offline Caveoftreasures

  • Trade Count: (+16)
  • ******
  • Forum Posts:
Re: terminator
« Reply #6 on: December 01, 2010, 03:31:06 AM »
$2500 for a real nice one with a 80 percent cabinet.

$3500 it looks like it has been at Grandma's house since it came out of a box.

When u look at the Terminator 2 that EL-TIMBO in melbourne has done, with new decals etc, its a good machine to use as a yard stick which i reckon would fetch $4000 plus.
Behind every garage door could be a pinball collectors
"Cave of Treasures" 55 in my collection

Into  Stern -JJP - Cars , Road Bikes- Jet Skis - Star Trek n Sci-Fi & Electronics    
Beware of Stalkers & Walkers when playing The Walking Dead

My 7yr old son Hunter is my best mate in the world !

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: terminator
« Reply #7 on: December 01, 2010, 08:49:41 AM »


When u look at the Terminator 2 that EL-TIMBO in melbourne has done, with new decals etc, its a good machine to use as a yard stick which i reckon would fetch $4000 plus.
 
*.*   Geelong not melbourne.  #@#

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: terminator
« Reply #8 on: December 01, 2010, 09:12:33 AM »

$3000 straight offsite with a minimal clean is too expensive.

$2200 - $2400 depending on condition.

Common pinball, so you have bargaining power.

Reconditioned - $3000 - $3200. A "Timbo" restored machine around $4000 - $4200.
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline Mr Pinbologist

  • Trade Count: (+5)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Wauchope NSW
Re: terminator
« Reply #9 on: December 01, 2010, 09:21:00 AM »
I said to Howzat last weekend, try to get a look inside the machine and look for hack repairs if he can, to get a better idea of what its worth.

i reckon el-timbo's T2 will be the best T2 on the face of the planet ^^^ ^^^

Offline Ant68

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Brisbane
Re: terminator
« Reply #10 on: December 01, 2010, 11:19:39 AM »
I said to Howzat last weekend, try to get a look inside the machine and look for hack repairs if he can, to get a better idea of what its worth.

i reckon el-timbo's T2 will be the best T2 on the face of the planet ^^^ ^^^

You haven't seen my HUO  T2 :D :D

Offline Mr Pinbologist

  • Trade Count: (+5)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Wauchope NSW
Re: terminator
« Reply #11 on: December 01, 2010, 12:07:51 PM »
I said to Howzat last weekend, try to get a look inside the machine and look for hack repairs if he can, to get a better idea of what its worth.

i reckon el-timbo's T2 will be the best T2 on the face of the planet ^^^ ^^^

You haven't seen my HUO  T2 :D :D
true that... ok i'll rephrase that, best "restored" t2 on the face of the planet :D

Offline bwodie

  • Trade Count: (0)
  • ****
  • Forum Posts:
Re: terminator
« Reply #12 on: December 01, 2010, 05:11:06 PM »
I said to Howzat last weekend, try to get a look inside the machine and look for hack repairs if he can, to get a better idea of what its worth.

i reckon el-timbo's T2 will be the best T2 on the face of the planet ^^^ ^^^

You haven't seen my HUO  T2 :D :D
true that... ok i'll rephrase that, best "restored" t2 on the face of the planet :D


check the pics of my ground up restored game  :D  :D
http://aussiepinball.com/index.php?topic=4106.0

Offline Ant68

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Brisbane
Re: terminator
« Reply #13 on: December 01, 2010, 08:24:32 PM »
I said to Howzat last weekend, try to get a look inside the machine and look for hack repairs if he can, to get a better idea of what its worth.

i reckon el-timbo's T2 will be the best T2 on the face of the planet ^^^ ^^^

You haven't seen my HUO  T2 :D :D
true that... ok i'll rephrase that, best "restored" t2 on the face of the planet :D


check the pics of my ground up restored game  :D  :D
http://aussiepinball.com/index.php?topic=4106.0

Awesome mate what a pearl-a

Offline ajlaird

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Greensborough, Melbourne
  • Go Ahead, Make My Day
Re: terminator
« Reply #14 on: December 01, 2010, 09:39:24 PM »


When u look at the Terminator 2 that EL-TIMBO in melbourne has done, with new decals etc, its a good machine to use as a yard stick which i reckon would fetch $4000 plus.
 
*.*   Geelong not melbourne.  #@#


Basically Geelong is a suburb of Melbourne these days anyway.