Author Topic: Charlies Angels Problem  (Read 442 times)

0 Members and 9 Guests are viewing this topic.

Offline Pinballrocks

  • Trade Count: (0)
  • ****
  • Forum Posts:
  • sydney
Charlies Angels Problem
« on: January 24, 2011, 07:33:52 PM »
Hi all,

If a game chip is put in upside down and it gets hot what damage can it do to your charlies angels??

 ^&^  @@^ Also looking for a sound board if anyone can help?

Cheers Paul
:) :)      PAUL     :):)

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Charlies Angels Problem
« Reply #1 on: January 24, 2011, 09:36:18 PM »

Most likely cooked !

Did you re install the chip correctly and test ?

Sound boards appear on eBay from time to time. Definitely in the USA.
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline Boots

  • Trade Count: (+8)
  • ******
  • Forum Posts:
  • Adelaide
Re: Charlies Angels Problem
« Reply #2 on: January 24, 2011, 09:42:48 PM »
If its cooked you could go for the Pascal PI-1 X4 board.
It combines all the boards for the game including the sound card and power supply.
If you opt for the add-on advanced sound card I believe you can use the sound set from any of the listed games for your game.
It sure eliminates a few problems and gives you great diagnotics aswell.
Good time to buy with the strength of the Aussie dollar

Here is his website:
http://www.flippp.fr/en/

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Charlies Angels Problem
« Reply #3 on: January 24, 2011, 09:48:43 PM »
If its cooked you could go for the Pascal PI-1 X4 board.
It combines all the boards for the game including the sound card and power supply.
If you opt for the add-on advanced sound card I believe you can use the sound set from any of the listed games for your game.
It sure eliminates a few problems and gives you great diagnotics aswell.
Good time to buy with the strength of the Aussie dollar

Here is his website:
http://www.flippp.fr/en/

+1

A great innovation. I've installed two and I think they are AWESOME !
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline pinnies4me

  • Administrator
  • Trade Count: (+5)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Victoria
Re: Charlies Angels Problem
« Reply #4 on: January 24, 2011, 09:50:38 PM »
If its cooked you could go for the Pascal PI-1 X4 board.
It combines all the boards for the game including the sound card and power supply.
If you opt for the add-on advanced sound card I believe you can use the sound set from any of the listed games for your game.
It sure eliminates a few problems and gives you great diagnotics aswell.
Good time to buy with the strength of the Aussie dollar

Here is his website:
http://www.flippp.fr/en/

+1 - although some like to keep the boards as close to original as standard, or the budget might not extend to a full replacement (no matter how good it is like Pascal's - I've got his boards in three or four games).

As for the original question - I would have thought the chip might be fried, but would that necessarily hurt the board? Might be worth noting which chip is involved so the electronics gurus can assist.
“If you wanna escape, go up to a pinball machine. There’s a magic button on the front that takes you to a world under the glass and makes the the rest of the universe disappear.”

Offline Mr Pinbologist

  • Trade Count: (+5)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Wauchope NSW
Re: Charlies Angels Problem
« Reply #5 on: January 24, 2011, 11:55:45 PM »
I think its unlikely any other chips in the board would've been damaged.. most likely only the one that was put in wrong. which chip are we talking about??

Offline Pinballrocks

  • Trade Count: (0)
  • ****
  • Forum Posts:
  • sydney
Re: Charlies Angels Problem
« Reply #6 on: January 25, 2011, 06:16:02 AM »
It was the actual game chip and it got pretty hot. (H)
:) :)      PAUL     :):)

Offline studley67

  • Trade Count: (+7)
  • ******
  • Forum Posts:
  • adelaide hills
    • facebook
Re: Charlies Angels Problem
« Reply #7 on: January 25, 2011, 01:13:09 PM »
+1 for pascal,i have one running my cleopatra.chip is cooked.did the same thing on a bally goldball but that was the only damage
Life is too short to spend time with people who suck the happiness out of you

Offline Mr Pinbologist

  • Trade Count: (+5)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Wauchope NSW
Re: Charlies Angels Problem
« Reply #8 on: January 25, 2011, 02:44:23 PM »
It was the actual game chip and it got pretty hot. (H)

i might be able to help you with a game ROM chip, i should have one from a charlies angels i parted years ago, i'll have a look and see if i still have it!

Offline Pinballrocks

  • Trade Count: (0)
  • ****
  • Forum Posts:
  • sydney
Re: Charlies Angels Problem
« Reply #9 on: January 25, 2011, 09:47:44 PM »
Thanks heaps, i would be extremely grateful  $#$
:) :)      PAUL     :):)

Offline Mr Pinbologist

  • Trade Count: (+5)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Wauchope NSW
Re: Charlies Angels Problem
« Reply #10 on: January 25, 2011, 11:37:14 PM »
I found the ROM chip for Charlies Angels, only problem is i cant say for sure its good though (the game was in pieces and half missing when i got it, but the MPU board was there and all in one piece) Im happy to send it to you to try out, it might just fix your game!!

 PM me your name and postal address and i'll stick it in the post..

Cheers... Mitch

EDIT: does your sound board just not work or is it missing completely??? If its there and just not working they're dead simple (and cheap) to repair
I have a system 1 sound board (1st sound board, the "fart fart fart soundboard" as Tim Arnold calls them)  :lol  have one here but i need to test it and see if it works
« Last Edit: January 26, 2011, 01:14:57 AM by Mr Pinbologist »

Offline pinnies4me

  • Administrator
  • Trade Count: (+5)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Victoria
Re: Charlies Angels Problem
« Reply #11 on: January 25, 2011, 11:49:05 PM »
Nice one Mitch, very generous of you!  ^^^
“If you wanna escape, go up to a pinball machine. There’s a magic button on the front that takes you to a world under the glass and makes the the rest of the universe disappear.”

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Charlies Angels Problem
« Reply #12 on: January 26, 2011, 10:52:42 AM »
Nice one Mitch, very generous of you!  ^^^

+1  ^^^
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline Mr Pinbologist

  • Trade Count: (+5)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Wauchope NSW
Re: Charlies Angels Problem
« Reply #13 on: January 28, 2011, 11:18:34 AM »
Parts have been sent  ^^^