My Flash Resto (Without Studley67)

[studley67]

mitchell tells me the boards woun't boot up.they have been sitting out in his damp shed for over 12 months.Any suggestions would be appreciated.me thinking moisture  got into the connectors or sockets.I had them running my flash before he took them home.

[Boots]

mitchell tells me the boards woun't boot up.they have been sitting out in his damp shed for over 12 months.Any suggestions would be appreciated.me thinking moisture  got into the connectors or sockets.I had them running my flash before he took them home.

What do they do, anything?
Start from the beginning, mains connection, power supply.....

[studley67]

all i can remember was that all boards were working before he took them home.plus they were fully overhaulled.I am not suppose to be helping him on this one.Lets see if he can figure it out,i have given him some clues.

[mildflame]

I'm sure I'll work it out eventually 
Once it's 100% back together I'll get the manual out and have a look over it and check all connectors again for burns/dirt ect.

[studley67]

to make it good for another 30 years you could re-pin all the connectors.fun,fun and more fun.

[studley67]

at least you now have a new you-bute FLUKE multimeter to test voltages etc.

[Strangeways]

mitchell tells me the boards woun't boot up.they have been sitting out in his damp shed for over 12 months.Any suggestions would be appreciated.me thinking moisture  got into the connectors or sockets.I had them running my flash before he took them home.

What do they do, anything?
Start from the beginning, mains connection, power supply.....

+1

Check Fuses etc. Could be something simple. The interconnectors would be the first place I'd look after the fuses.

[mildflame]

Progress:
Lock down bar assembly done. Door done. Pop bumper caps installed.

[Strangeways]

Looking good Mitch - did you get the game going ?

[mildflame]

Not just yet. Been lazy.
I know its probably a voltage problem but still have some checking to do.