Author Topic: Playfield Stand  (Read 2135 times)

0 Members and 1 Guest are viewing this topic.

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Playfield Stand
« on: September 17, 2008, 12:47:13 PM »

Playfield Stand

This is a handy playfield stand that I made 2 - 3 years ago from leftover pieces of wood. Took an hour to make and I use it on every machine I recondition or restore. I have two stands - the one pictured fits any single body playfield. My other one was made for widebody pins.

When you are not using it - Just store it under a pinball, or hang it on the wall. I have added felt strips to protect the playfied when reversed.







Next piece of equipment I want to make is a playfield rotisserie  - on wheels !




Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline ktm450

  • Trade Count: (+1)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong, Victoria
Re: Playfield Stand
« Reply #1 on: September 20, 2008, 12:14:00 AM »
Simple and effective, nice Nino

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Playfield Stand
« Reply #2 on: September 20, 2008, 12:26:49 AM »

I also use it for DMDs now. You can remove the playfield and have it placed on the stand (which is in turn in a table next to the DMD), and troubleshoot the pin with the playfield out.

It is easily my favorite "tool in the shed"..
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline MartyJ

  • Trade Count: (+4)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Melbourne
Re: Playfield Stand
« Reply #3 on: January 16, 2009, 07:11:53 PM »
Hi Nino,

I just came across this brillant but simple jig.  Would you please be able to post the measurements as I WILL build this tomorrow (hopefully).

THanks again

Marty.

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Playfield Stand
« Reply #4 on: January 16, 2009, 07:35:25 PM »
Hi Nino,

I just came across this brillant but simple jig.  Would you please be able to post the measurements as I WILL build this tomorrow (hopefully).

THanks again

Marty.

Sure Marty..

What made it so simple was that it was made from offcuts and I "made it up" as I went along...

If not tonight - I'll do it tomorrow.. It is "somewhere" in the garage !

Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline Retropin

  • Trade Count: (+4)
  • ******
  • Forum Posts:
Re: Playfield Stand
« Reply #5 on: January 16, 2009, 11:14:25 PM »
Nino sent me a pic of this and i made one up in about an hour.

Just measure the outer width and length of the pF. Then add 20mm

Screw the timber together and then apply the inside shorther ones to the inside of what youve already made, using 40mm X 70mm timber throughout

I dont know how i ever managed to do PF restores without this now - its an awesome tool

Offline MartyJ

  • Trade Count: (+4)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Melbourne
Re: Playfield Stand
« Reply #6 on: January 17, 2009, 12:59:16 PM »
Hi Nino,

I just came across this brillant but simple jig.  Would you please be able to post the measurements as I WILL build this tomorrow (hopefully).

THanks again

Marty.

Sure Marty..

What made it so simple was that it was made from offcuts and I "made it up" as I went along...

If not tonight - I'll do it tomorrow.. It is "somewhere" in the garage !



Hi Nino,

Don't worry about the measurements..I have basically knocked off your design...(hope you don't send me a C&D email  %$%  )

Offline MartyJ

  • Trade Count: (+4)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Melbourne
Re: Playfield Stand
« Reply #7 on: January 17, 2009, 01:55:42 PM »
Its done.  I must say, with some measuring and planning it turned out OK.  I have ZERO carpentry skills and usually end up breaking it.

Now for the test - if the actual playfield fits  ::)

Thanks for the idea Nino.  Great stuff.


Offline Creech

  • Forum Founder
  • Trade Count: (0)
  • *****
  • Forum Posts:
  • Adelaide
Re: Playfield Stand
« Reply #8 on: January 17, 2009, 02:46:01 PM »
Well done mate.

How's this for a new career Nino? Playfield stand designer.  :lol

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Playfield Stand
« Reply #9 on: January 17, 2009, 02:55:58 PM »

Expect a C&D for being a "Good Bloke", Marty  %.%

Nice job and an improvement on my design. I'm pleased to say my stand design is now being used for a few pinheads - and if it makes their jobs easier - I'm all for it  ^^^
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline MartyJ

  • Trade Count: (+4)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Melbourne
Re: Playfield Stand
« Reply #10 on: January 18, 2009, 11:29:39 PM »
I've attached a rough pic with measurements if anyone wants to build one.  It certainly fits my T2 playfield perfect.

As for materials they are as follows:

  • 4 x Pine dressed DAR board 90mm x 19mm x 1.8m (cost of $18.72)
  • 1 x Pine dressed DAR board 140mm x 19mm x 1.8m (cost of $7.56)
  • 4 x angle bracket heavy duty carinya 100mm x 100mm x 40 Zinc (cost of $19.04)
  • assorted screws

So for a total cost of $45.32 a handy jig to have....Thanks again to Nino for the ideas...


Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Playfield Stand
« Reply #11 on: January 19, 2009, 12:13:37 AM »

As a finishing touch - I added "beer seal" offcuts to the sections that the playfield rest on. This is handy if you want to turn the playfield upside down.
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline SPURR

  • Trade Count: (0)
  • *****
  • Forum Posts:
  • Newcastle
Re: Playfield Stand
« Reply #12 on: January 27, 2009, 09:33:59 PM »
Strangeways     HE'S AN IDEAS MAN!  Ive been using paint tins for years hasnt been really successful &^&  My next project