Author Topic: Thermistor  (Read 854 times)

0 Members and 3 Guests are viewing this topic.

Offline faza

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Sydney
Thermistor
« on: July 11, 2011, 11:37:43 AM »
My TAF started to reset occasionally and has recently deteriorated and constantly resets .
I had replaced all the usual suspects Capacitors and Bridge rectifiers as well as installing links as per clays guide during the restoration .
I have tracked the fault down to the Thermistor i have bridged it out temporarily and no more problems .
Trying to track down where i can buy this from none of the suppliers in Oz seem to stock them.
Jaycar dont seem to have a compatible type.
Any ideas  !@#

Offline 48

  • Trade Count: (+2)
  • *****
  • Forum Posts:
Re: Thermistor
« Reply #1 on: July 11, 2011, 11:42:20 AM »
Details of the leaky thermistor mate?
Have found some in the past for some Williams machine, can't remember which one though.
Was on a driver board from memory.
I am assuming you are not talking about the main one on the 240V side, if so Jaycar have them.
Lets go Brandon!

Offline RatBag

  • Trade Count: (+1)
  • *****
  • Forum Posts:
  • Perth
Re: Thermistor
« Reply #2 on: July 11, 2011, 11:59:55 AM »
I get mine from Homepin ,drop him a message

Offline Homepin

  • Trade Count: (+15)
  • ******
  • Forum Posts:
  • Not a business - A Passion!
Re: Thermistor
« Reply #3 on: July 11, 2011, 02:35:30 PM »
I get mine from Homepin ,drop him a message

I have plenty of stocks of both the NTC Thermistor and the MOV (suitable for 220V use).
Replacement Pinball PCBs that remain faithful to the originals

Offline faza

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Sydney
Re: Thermistor
« Reply #4 on: July 11, 2011, 03:35:19 PM »
I get mine from Homepin ,drop him a message

I have plenty of stocks of both the NTC Thermistor and the MOV (suitable for 220V use).


PM sent

Offline Homepin

  • Trade Count: (+15)
  • ******
  • Forum Posts:
  • Not a business - A Passion!
Re: Thermistor
« Reply #5 on: July 11, 2011, 03:49:35 PM »
I get mine from Homepin ,drop him a message

I have plenty of stocks of both the NTC Thermistor and the MOV (suitable for 220V use).


PM sent

PM answered  %.%
Replacement Pinball PCBs that remain faithful to the originals

Offline faza

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Sydney
Re: Thermistor
« Reply #6 on: July 16, 2011, 09:49:18 PM »
Parts recieved and installed  great service  @@*

Marty Machine

  • Guest
  • Trade Count: (0)
Re: Thermistor
« Reply #7 on: July 16, 2011, 09:54:03 PM »
I get mine from Homepin ,drop him a message
I have plenty of stocks of both the NTC Thermistor and the MOV (suitable for 220V use).
PM sent
PM answered  %.%
PM witnessed  *)*

Offline Homepin

  • Trade Count: (+15)
  • ******
  • Forum Posts:
  • Not a business - A Passion!
Re: Thermistor
« Reply #8 on: July 16, 2011, 11:18:02 PM »
 $.$
Replacement Pinball PCBs that remain faithful to the originals