Author Topic: Terminator 2 playfield resto - Part II  (Read 7309 times)

0 Members and 4 Guests are viewing this topic.

Offline MartyJ

  • Trade Count: (+4)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Melbourne
Re: Terminator 2 playfield resto - Part II
« Reply #90 on: February 19, 2009, 11:42:26 AM »
you're right about the skull area, although I found a better way in doing it. Mind you because I haven't done it for a long time, I've forgotten, so it'll be fiddley and then when its all over, I'll figure the easy way again. Always the case. Although I may have it on video, gotta try and track it down.

I will remove as much as possible, but you are right about worrying to remove the playfield. I figure its a major job, however, I'll have a careful look at it now seeing you reckon it's not that major. Since being on these sites I've done things that scared me shitless before and now they don't bother me.

I think its the "how much will it cost to fix the stuff up" or even worse can it be fixed after I've screwed it up. I've found most things aren't that tragic, parts seem to pop up here and there etc etc.

BTW the shellite, is it used to remove the residule glue? I read people in the US use GOO GONE then do a final clean with napthane/shellite. Did you ise only shellite and elbow grease?

As long as you don't drop the playfield, or break any underside parts, you will be fine!

Yes, the shellite is used for glue removal.  I've read about the goo gone, but it can affect paint to my knowledge.

Last time I only used shellite and worked very well