Today I had another 4hour block on the CNC machine at techshop... I finished up drilling the holes in the PF:
I also flipped the PF and CNCed out the proximity slots on the underside of the PF:
I have about 7 hours total in the PF including setup and actual CNC time.
I cleaned the wood "fuzzies" from the top of the PF with a wire brush attachment on my dremel. There is currently Primer grey on the underside of the PF... trying to dry in this cold as$ texas night. Yes; I know your not suppose to paint below 50F... but I really don't have a lot of choice if I'm going to meet the TPF'14 deadline.
Tomorrow I hope to begin inserting the inserts.
