Message #93932

[greatwichjohn]

Here are some pictures of the 2 playfields here for direct ink. If you don't know the process I use, here is another introduction. Playfield is sent in with everything top & bottom removed. Playfield is sanded bare top & bottom is just lightly sanded. I check the light lenses to see if they are loose, & they are usually ok. Playfields get 2 coats of waterbourne varethane, lenses & wood areas are masked, & sprayed with acrylic gloss white. Masking removed, 2 more coats of varethane, & 1/2" mdf screwed to the back to level out playfield. If everything looks good it gets inked using a uv inkjet printer. Playfield looks good it gets 4 coats of varethane, & then out to another guy for about 3 finish coats. The album starts with pictures of Space Shuttle that was masked & sprayed white gloss to give you a better idea.

http://s36.photobucket.com/albums/e28/greatwichjohn/Star%20Gazer/?action=view&current=014.jpg#!oZZ10QQcurrentZZhttp%3A%2F%2Fs36.photobucket.com%2Falbums%2Fe28%2Fgreatwichjohn%2FStar%2520Gazer%2F%3Faction%3Dview%26current%3D010.jpg