« previous next »
Pages: [1]   Go Down

Author Topic: Funhouse right flipper problem  (Read 215 times)

0 Members and 1 Guest are viewing this topic.

Offline Crashramp

  • Trade Count: (+3)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Albury
Funhouse right flipper problem
« on: June 08, 2013, 08:25:39 AM »
Hi Guys,

I currently have a Funhouse at my place with a right flipper issue. After a few games it blows a fuse and dies. I haven't found any wires broken or touching anything they shouldn't and the coil tests fine. Any ideas?
Logged

Offline pinnies4me

  • Administrator
  • Trade Count: (+5)
  • *****
  • High Score Initials:
  • Forum Posts:
    • Victoria
Re: Funhouse right flipper problem
« Reply #1 on: June 08, 2013, 08:44:23 AM »

Might be worth changing the diode on the two right hand coils, cheap and quick to eliminate.
Logged
“If you wanna escape, go up to a pinball machine. There’s a magic button on the front that takes you to a world under the glass and makes the the rest of the universe disappear.”

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
    • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Funhouse right flipper problem
« Reply #2 on: June 08, 2013, 12:44:59 PM »
Quote from: pinnies4me on June 08, 2013, 08:44:23 AM

Might be worth changing the diode on the two right hand coils, cheap and quick to eliminate.

+1

Also check the EOS. If the EOS is open all the time the coil will get hot and eventually blow the fuse.
Logged
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline pinball god

  • Trade Count: (+1)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Melbourne
  • Metallica is here to stay
Re: Funhouse right flipper problem
« Reply #3 on: June 08, 2013, 01:46:39 PM »
Quote from: Strangeways on June 08, 2013, 12:44:59 PM
Quote from: pinnies4me on June 08, 2013, 08:44:23 AM

Might be worth changing the diode on the two right hand coils, cheap and quick to eliminate.

+1

Also check the EOS. If the EOS is open all the time the coil will get hot and eventually blow the fuse.
EOS spacing has always caused me problems with fuses blowing
Logged
Still loving my Metallica Premium

Offline Crashramp

  • Trade Count: (+3)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Albury
Re: Funhouse right flipper problem
« Reply #4 on: June 08, 2013, 02:00:07 PM »
Will do, thanks for the responses.
Logged
Pages: [1]   Go Up
« previous next »