I thought I'd start to document the work I have done on my machine. This is my first major Restore. Its been a slow process but here is what I have done so far.(Sorry no photos to this point.)
Playfield stripped and sent it for restoration.
85% of the playfield parts and circuit boards cleaned.
Plastics are in excellent condition.
Playfield wiring loom cleaned.
Coils cleaned as best as I could and new paper wraps and sleeves fitted.
Flippers cleaned and re-built with new bushes and coils.
Thing stripped and cleaned.
Book case stripped and cleaned.
New pop bumpers top side, electric chair, main ramp with stainless flaps, book case and stand up targets are waiting to go in.
I have LEDs waiting to go in.
What I plan to do next while waiting for the field! Structurally the cabinet is in perfect condition but I have new cabinet art to install as the original colours have faded. The plan is to sand, fill and re spray the cabinet before installing them. Not sure what to do with the yellow warning lettering on the back?
New coin door to go in.
Hopefully polish the lock down bar, side rails, legs, etc.
and finally the back box boards seem relatively untouched but with hopefully go to Beaky for a tune up.
That's about it, so any advice, tips, comments good are bad along the way would be appreciated
