ss plunger sleeve

[pinball god]

Any ideas who might sell either new or used one of these?

[Crashramp]

I'd rather buy local but I had trouble finding these myself 12 months or so ago. Ended up getting them from Best of Pinball http://www.bestofpinball.de/catalog/product_info.php/cPath/120/products_id/13196
I'd be interested to see if anyone else has another point of sale for them but this where I brought them from.
Best of pinball delivery can take awhile to turn up but if there are issues they will sort you out. They're a good source for for hard to come by coils as well.

[Toads]

Unless it's broken why get a new one. It's has a cover on the front and the back is not seen.
I just cleaned my one up and sourced a new cover plate.

[Boots]

Unless it's broken why get a new one. It's has a cover on the front and the back is not seen.
I just cleaned my one up and sourced a new cover plate.

Sometimes they look ok but are a bit sloppy

[Sinbad79]

I know pinball resource have them

[pinball god]

Unless it's broken why get a new one. It's has a cover on the front and the back is not seen.
I just cleaned my one up and sourced a new cover plate.

Sometimes they look ok but are a bit sloppy

exactly boots the plunger is very sloppy in this. So its either this or could I have a wrong plunger in this game. Do the shaft differ in diameter or just length?

[pinball god]

I'd rather buy local but I had trouble finding these myself 12 months or so ago. Ended up getting them from Best of Pinball http://www.bestofpinball.de/catalog/product_info.php/cPath/120/products_id/13196
I'd be interested to see if anyone else has another point of sale for them but this where I brought them from.
Best of pinball delivery can take awhile to turn up but if there are issues they will sort you out. They're a good source for for hard to come by coils as well.

thanks mate may have to try them

[Strangeways]

if it is sloppy, then dip it in degreaser and clean the inside shaft with a rag over a scewdriver. These seldom need replacing, just a good clean !

[pinball god]

if it is sloppy, then dip it in degreaser and clean the inside shaft with a rag over a scewdriver. These seldom need replacing, just a good clean !

great will give this a try