Maverick paddle wheel motor so slow...

[Klondike]

The technician suggested the two pulleys might have been reversed at some stage and this might be causing the slow rotation of the paddle wheel...is that possible?

[dealers choice]

I don't see why anyone would even consider that. I'm beginning to wonder how many other people have been charged for unrepaired pins by a tech. I have heard of people that say the machine is too expensive to repair and then to offer a low price to buy it.

[Klondike]

I don't think the motor is getting enough power...I compared it to someone elses and they get 29v and I'm getting 19v.

[pinsanity]

Check the voltage input on the motor terminals.

 

[Klondike]

Check the voltage input on the motor terminals.


That's the 19v I  just mentioned...

[Retropin]

Who's the tech? Pretty basic and standard procedure to test the voltage going to the motor... its meant to be 30V and you get 19V?.. Surprised its turning at all.

[Strangeways]

Time to pull out the manual and check the source of the voltages. If the manual was not provided, check eBay - it was most likely removed and then listed separately 

[Klondike]

Who's the tech? Pretty basic and standard procedure to test the voltage going to the motor... its meant to be 30V and you get 19V?.. Surprised its turning at all.

I'll keep that to myself for now. If he rebuilt the power board might it be the relay under the playfield or should I be looking elsewhere?

[oldskool1969]

I have a manual that I can send you via email but it is 9MB

[Klondike]

I have a manual that I can send you via email but it is 9MB

Thanks oldskool, I'll pm my email address.

[Klondike]

Who's the tech? Pretty basic and standard procedure to test the voltage going to the motor... its meant to be 30V and you get 19V?.. Surprised its turning at all.

Can you recommend a tech in the Brisbane area?

[Caveoftreasures]

 Andrew Bussitul (Beaky ) is the best tech in QLD.
Nothing he can't fix incl all computer board refurbishment.
Works on all manufacturers pinballs.
Been using Andrew for five plus years.

He is listed under member services, Beakys Pinball Repairs Gold Coast n Brisbane.

Or send him a PM.

[dealers choice]

+1 for Beaky

[DSB]

+ 2 for beaky. Very knowledgeable on pinball repairs and especially electrical issues.

[Klondike]

Thanks guys...I'll give Beaky a call.