Author Topic: FAULTY POKIE HELP NEEDED (Read 632 times)

ddstoys · « **on:** April 30, 2009, 05:37:48 PM »

Hi has anyone here had any experience with Jubilee one armed bandits? having an issue with it paying out on a win sometimes it does other times it doesnt ive cleaned all the connectors and checked for dry joints but no luck is there any way to check individual chips etc wtihout knowing what they are or do?

Marty Machine · « **Reply #1 on:** April 30, 2009, 06:46:40 PM »

Do you have access to the wheels where you can position them into a "win" and note if the coin-release solenoid activates or not? maybe something as simple as a tired solenoid, burnt/deformed coil or sleeve?

The fact that it 'sometimes' pays out (or not) shows that a jackbot does activate the coin-release, but not everytime...

However, the fault might also be before the coin release, maybe an intermittent driver transistor for the coin release etc.

MM.

ddstoys · « **Reply #2 on:** April 30, 2009, 07:04:38 PM »

I might check that marty it used to flash the win light whenever it won anything but shutdown if it didnt give the right money now it doesnt do any of that lol

illawarra_steelers · « **Reply #3 on:** May 01, 2009, 04:27:48 PM »

Daniel,

I have just emailed you a manual for an Aristocrat that may be of help

ddstoys · « **Reply #4 on:** May 01, 2009, 04:33:22 PM »

Thanks Tony ill check my email now

pinnies4me · « **Reply #5 on:** May 01, 2009, 06:42:38 PM »

"Re: FAULTY POKIE HELP NEEDED"

I suspect any help I could offer would be faulty mate...

ddstoys · « **Reply #6 on:** May 01, 2009, 07:14:28 PM »

Should this thread be removed maybe?

News:

Author Topic: FAULTY POKIE HELP NEEDED (Read 632 times)

Marty Machine