Topper not working on Police Force

[infinite1977]

That map is confusing to me.
Picture attached. Only red dome flasher working is the one in the top left corner

[infinite1977]

That map is confusing to me.
Picture attached. Only red dome flasher working is the one in the top left corner

[Steevsee]

Thanks for pic.

You're right map is confusing.  Doesn't show the dome at lower left at all.

So 1C and 3C are not working.

I assume you've checked the globes themselves?

[infinite1977]

Yep

[infinite1977]

Glad it wasn't just me
 This would have to be the worst manual ever

[Steevsee]

Pm sent.

[infinite1977]

Can't fix knocker. Missing sleeve for it but I do hear it clicking on the test.

[Steevsee]

The black/violet wire in the picture yo pm'd me controls the left side of the topper.

You could try test continuity from top plug to J11(blk/vio wire).

Also you could try swapping connectors J11 and J12 to see if any change to topper
.

[infinite1977]

Perfect. That wire is one of the loose ones. That makes me feel better.

[infinite1977]

J12 won't plug into J11 different pin configuration. I will sort out wiring on this plug and report back . Thanks for everything.  Might be a couple of days

[Steevsee]

J12 won't plug into J11 different pin configuration. I will sort out wiring on this plug and report back . Thanks for everything.  Might be a couple of days

Sorry bout that, I see now they are keyed differently.

[infinite1977]

As i was tinkering with the plugs a burning smell came about and GI has gone.
Only just had it fixed!!!!

[Steevsee]

Were you able to locate the source of the smell.

GI fuses OK?

[infinite1977]

All fuses tested ok

[Steevsee]

GI connectors (J6 and J7) on the interconnect board dark/charred?