Author Topic: Fish Tales Resto  (Read 6193 times)

0 Members and 1 Guest are viewing this topic.

Offline Mr Pinbologist

  • Trade Count: (+5)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Wauchope NSW
Fish Tales Resto
« on: May 18, 2016, 08:01:03 AM »
G'day all

Some pics of a Fish Tales i'll be doing for Ian (aka howzat) here on AP.

He scored this one, complete with its busted playfield glass from a local car dealer who had had a few pins over the years, this was the last one which he'd had in storage for a lot of years where something was dropped onto the PF glass  @.@

Ian's a motor trimmer/upholsterer by trade, and he did a barter deal with the car yard owner who wanted some seats retrimmed in a Commodore from his personal car collection, and $500 cash for the pin. I think Ian did pretty good getting the pin for that deal, as i inspected the game for him, the only main issue with the pin i found (apart from the glass everywhere) was a dead sound board, and the topper was damaged, broken where it screws down.

The game booted up when we powered it up, DMD was good, no dots out etc and all of the boards looked good (except the sound board which had blown output chips). The MPU, the batteries were JUST starting to leak so no acid damage to the board which was my biggest concern, having sat for many years unused. Another nice surprise was i saw NONE of the usual power/driver board connector hacks!! So it shouldn't take much to get it all fully up and running  #*#

The game has the usual fading of the cabinet, The hunt for parts has started.. i have new chrome legs and a new topper here already, and cab decals have been ordered.

Ian can chime in with some more info on the deal or anything i've forgotten about  :D











Ian removed a lot of the glass when he dropped the game off while he was here, revealing what will be a SWEET playfield, a few slightly raised inserts but NO WEAR that I can see!!





Will add more at a later date as the project progresses, I still have a few other games ahead of this one but i'll do my best to squeeze this one in for Ian  *%*
« Last Edit: May 18, 2016, 08:08:35 AM by Mr Pinbologist »

Offline GORGAR 1

  • Trade Count: (0)
  • ******
  • High Score Initials:
  • Forum Posts:
  • BROOKFIELD-MELBOURNE
Re: Fish Tales Resto
« Reply #1 on: May 18, 2016, 08:55:37 AM »
Nice pickup  :) I'm a fan of FT such a fun game. Will be watching this resto with great interest

Offline oldskool1969

  • Trade Count: (0)
  • ******
  • High Score Initials:
  • Forum Posts:
  • perth
Re: Fish Tales Resto
« Reply #2 on: May 18, 2016, 09:57:04 AM »
WOW free diamonds  ^^^
such a fun beautiful game.
If it isn't broke, it isn't pinball.

Offline pinsanity

  • Trade Count: (+2)
  • ******
  • Forum Posts:
Re: Fish Tales Resto
« Reply #3 on: May 18, 2016, 03:29:49 PM »
Should clean up nicely.  ^^^

Offline RottyGuy

  • Trade Count: (+5)
  • ******
  • Forum Posts:
  • QLD
Re: Fish Tales Resto
« Reply #4 on: May 18, 2016, 08:22:21 PM »
Very worthy of a resto. One of the best pinballs ever made.

Offline Crashramp

  • Trade Count: (+3)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Albury
Re: Fish Tales Resto
« Reply #5 on: May 18, 2016, 09:30:13 PM »
Very cool pickup and a nice story to go with it, can't beat that! Looking forward to seeing the resto.

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Fish Tales Resto
« Reply #6 on: May 18, 2016, 10:13:49 PM »
You will be finding glass for months lol.    But well worth a resto

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Fish Tales Resto
« Reply #7 on: May 19, 2016, 11:54:01 AM »
Glad to see it is in good hands before going to it's new home.

Plastics Set is on it's way from the USA - so let me know if you need one !
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline Boots

  • Trade Count: (+8)
  • ******
  • Forum Posts:
  • Adelaide
Re: Fish Tales Resto
« Reply #8 on: May 19, 2016, 02:10:33 PM »
Be watching this with interest, got one to do myself ^^^

Offline pinball god

  • Trade Count: (+1)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • Metallica is here to stay
Re: Fish Tales Resto
« Reply #9 on: May 19, 2016, 09:23:53 PM »
really interested to see how you piece together all that glass and make it one piece again  !@# Can't wait for the next instalment  ^^^
Still loving my Metallica Premium

Offline Mr Pinbologist

  • Trade Count: (+5)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Wauchope NSW
Re: Fish Tales Resto
« Reply #10 on: May 20, 2016, 07:40:42 AM »
Glad to see it is in good hands before going to it's new home.

Plastics Set is on it's way from the USA - so let me know if you need one !

I'm not sure if Ian wants to replace the whole set, but it definitely could use some Sling plastics as they are a bit sorry looking  *%*
Also the center plastic between the two ramp entries has a chip out of one edge, the others look ok.

Offline MrMaloo

  • Trade Count: (+3)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Cessnock NSW
Re: Fish Tales Resto
« Reply #11 on: May 20, 2016, 04:45:24 PM »
Totally up to you guys but I changed my pop bumper skirts and caps to blue and changed the lane guides to green . Looks heaps better than standard colours IMO .


Offline howzat

  • Trade Count: (0)
  • *****
  • Forum Posts:
Re: Fish Tales Resto
« Reply #12 on: May 27, 2016, 10:39:23 PM »
Mr maloo
I like the look of yours its very tempting   

This game I spotted approx 2 yrs ago and its been like it since
The car yard owner  needs the space as he has 15 unfinished car projects   chevies  sandman pannel vans  brock c/dores just to name a few
 
I carnt understand how he could have so many projects as they are all worth so many $   

It will be great to have a DMD game   all mine are wide body SS which I luv from back in the old arcade days
Mitch has been collecting parts so we can start on the resto   Im looking fwd to doing what I can to help him   mainly cleaning and sanding :lol   Ian

Offline Mr Pinbologist

  • Trade Count: (+5)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Wauchope NSW
Re: Fish Tales Resto
« Reply #13 on: May 27, 2016, 11:17:25 PM »
Some goodies for Fish Tales have arrived..

Cab decals arrived today  #*#




And topper and new chrome legs which arrived a couple of weeks ago




It looks like i'll be starting on this game soon, I'm putting Ian to work on stripping the old decals off the cabinet so i can do the necessary repairs before the new decals go on.

Offline Mr Pinbologist

  • Trade Count: (+5)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Wauchope NSW
Re: Fish Tales Resto
« Reply #14 on: July 23, 2016, 09:55:35 AM »
A bit more progress on Fish Tales has been made;

Have made a start on the cabinet, Ian and i stripped everything out of the cab and backbox a few weeks ago.











Backbox stripped of all parts, ready for paint stripping and repairs.
Luckily not much repair was needed on the backbox and cabinet, both being pretty solid.





I put Ian to work stripping the paint off the backbox and cabinet :D





Something i do on any cab that is getting decals is to seal the bottom panel with a clear coat to protect the MDF from water damage. I'll be using the soapy water method to apply the decals (with Ian's help of course!!)  *%*

He took it upon himself to snap a pic of me spraying the bottom panel!





First coats of primer applied; Backbox..







And cabinet. I've added a black guide coat to aid in finding low spots that need further filling later on.







And i have to say, what a royal PAIN IN THE ARSE it is removing the bloody decal glue  ^.^ I'd read about people using white spirits to remove it, and i'd even watched you tube videos of guys using it to remove the glue.

In the finish the quickest way i found was to use paint thinners and a razor blade to scrape it off.

I'm just glad that i dont have to work on too many decalled cabs!!



« Last Edit: July 23, 2016, 10:00:07 AM by Mr Pinbologist »