Author Topic: Harlem G/T problem (Read 553 times)

pinfrog · « **on:** August 21, 2009, 04:01:01 PM »

Hi can someone please help !Fired up the Harlem Globetrotters this morning, put some credits on the machine pushed credit button to start game and nothing , game would not start. What may the problem be . Cheers.

ddstoys · « **Reply #1 on:** August 21, 2009, 04:26:24 PM »

Check the switch contacts on the back of the Start button are touching when you push the button

pinfrog · « **Reply #2 on:** August 21, 2009, 04:34:13 PM »

Switches seem to be making cotact when the button is pressed.

Strangeways · « **Reply #3 on:** August 21, 2009, 04:58:29 PM »

Refit the top RHS connector on the MPU board

Check the diode on the credit button is not shorting out against the door.

pinfrog · « **Reply #4 on:** August 21, 2009, 05:06:58 PM »

Thanks again ,connectors on the MPU board seemed to be the problem.

Strangeways · « **Reply #5 on:** August 21, 2009, 05:22:46 PM »

Quote from: pinfrog on August 21, 2009, 05:06:58 PM

Thanks again ,connectors on the MPU board seemed to be the problem.

Lightly sand the pins in the connector with 360 Wet/Dry. Reinsert the connector housing and then push each wire into the connector.

In the future - you may need to replace the pin connector and pins

News:

Author Topic: Harlem G/T problem (Read 553 times)

pinfrog

Harlem G/T problem

ddstoys

Re: Harlem G/T problem

pinfrog

Re: Harlem G/T problem

Strangeways

Re: Harlem G/T problem

pinfrog

Re: Harlem G/T problem

Strangeways

Re: Harlem G/T problem