Author Topic: EARLY EM STARTUP PROBLEM  (Read 248 times)

0 Members and 2 Guests are viewing this topic.

Offline millsy

  • Trade Count: (+2)
  • ******
  • Forum Posts:
  • Illawarra
  • pinballaustralia.com
    • Pinball Australia
EARLY EM STARTUP PROBLEM
« on: November 05, 2009, 08:57:54 PM »
Cant seem to get past this startup on my 60s Gottlieb Sweethearts - This is as far as I can get.
1- Turn machine on - All backglass and playfield illuminate EXCEPT for the Game Over or Tilt light (The Hold relay has been removed & the wires joined together) No relays are energized at this stage.

2- Press Start button - Score wheels reset, Reset and Start Relays energize in and out.Score Motor rotates 360 deg while all this is happening.
Thats as far as it goes - All lights illuminated but NO Flippers,Bumpers or scoring happening.

Have cleaned all switch blades,including score motor,also made sure 5 balls are loaded (Manual Lifter)

Next Step ????  !@# !@#
Millsy
« Last Edit: November 05, 2009, 08:59:26 PM by millsy »
pinballaustralia.com

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: EARLY EM STARTUP PROBLEM
« Reply #1 on: November 05, 2009, 10:30:51 PM »
Have you checked all relay coils with a multi meter?  Sound like your game over relay isnt activating !@#

Offline Retropin

  • Trade Count: (+4)
  • ******
  • Forum Posts:
Re: EARLY EM STARTUP PROBLEM
« Reply #2 on: November 05, 2009, 10:39:16 PM »
Try the "kick off switch/ slam switch" in the bottom of the cabinet - if this goes open it disables all game play

Offline arcadoz

  • Trade Count: (0)
  • ***
  • Forum Posts:
  • Country SA
Re: EARLY EM STARTUP PROBLEM
« Reply #3 on: November 05, 2009, 11:46:02 PM »
Once start relay has done it's stuff, directing power to all reset circuits, it turns off and sends power through the hold relay to power up the rest of the game such as flippers, scoring etc.
Maybe it has something to do with the missing hold relay  !@#
EM score motors wanted- nonworking, broken, burnt, etc..

Offline millsy

  • Trade Count: (+2)
  • ******
  • Forum Posts:
  • Illawarra
  • pinballaustralia.com
    • Pinball Australia
Re: EARLY EM STARTUP PROBLEM
« Reply #4 on: November 08, 2009, 04:02:23 PM »
Got me stuffed this one.
Rechecked everything I can possibly check (I Think)  ^&^
Cant get any response from anything on the playfield except the illumination lights and the bank reset solenoids ^&^ ^&^
Moments like this i wish i had a working 60s machine to compare,looks like it goes back in the corner for a while until im in a better mood,frustration is setting in *)*
pinballaustralia.com