The forum software has been updated!
0 Members and 3 Guests are viewing this topic.
Yes... possible faulty noise/ripple cap on the board... also make sure you have solid grounding. I always solder extra ground from the board ground and screw to the true ground on the machine...ie earth braid etc
Speaker grounded ?Do you have a spare SB-300 sound board ? Could be one of the caps on the board, and swapping the board with a spare might isolate the issue.
Fixed. Broken SB cable .One pin, Looks like the factory were rough when putting the cable together and cracked the plastic connector housing and it finally let go after many hours of shaking. Thanks for the tips
Thanks for your help ralph,enjoyed playing the meteor with taylah and pop lastnight,pop's puts some coolas leds in aswell Quote from: ralph67 on March 17, 2012, 03:09:41 PMFixed. Broken SB cable .One pin, Looks like the factory were rough when putting the cable together and cracked the plastic connector housing and it finally let go after many hours of shaking. Thanks for the tips