Author Topic: Capt Fantastic... what a bloody mess!  (Read 2971 times)

0 Members and 9 Guests are viewing this topic.

Offline Retropin

  • Trade Count: (+4)
  • ******
  • Forum Posts:
Capt Fantastic... what a bloody mess!
« on: August 12, 2012, 09:29:09 PM »
I got this game ages ago and have had it stored for about 4 years.
I finally dragged it out today with the intention of doing a "Smithsonian" restore on it.. similar to what i did with the 1937 Stoner RICOCHET.
Well it would seem that ive had this tucked away for so long that i had developed rose tinted glasses...all this time ive been looking at the cabinet side art and playfield, which are pretty presentable.
I had decided to restore this machine to a tidy 35 year old game and touch up the cabinet where necessary using matching paints to the original old artwork.
I have a donor cab that i HAD intended using, but today, i decided not to.
CAPT FANT is here in my little workshop.. donor cab is the NIGHTRIDER shoved down the side..LOL



The top of the header for Capt fant is missing.. game had been dropped at some point breaking this and smashing the glass.
I pulled the top off the Nightrider and attached it to Capt fant..



A quick spray of this in CF colours and im laughing!!!

I then pinched the header mount.. reglued it and attached this..

.


All ready to go... and so out comes the cabinet... now i remembered that the game was dirty... dirty i said... what i didnt remember was this!



Water damaged back...



MUD GALORE!!!!!!!





Inside the game also stinks... stagnant water and crud.. bloody horrible!

So now i have a rethink... this games a POS im thinking... what to do... what to do???

I have a spare bottom board too from good old Night Rider... can pinch stuff off here as Capt Fant is USA model and has a friggin ugly stepdown attached to the back ( which has been bypassed to a rotten 240V cable.. !@# !@#

Looks like im back to where i started... COMPLETE restore using donor cab and restencilling... replace parts ive stolen and start again.
I lift the bottom board out to stick it outside.. smell is awful.. as i do this, the bottom of the cabinet just gives way with rot.
Guess that confirms it then i think??

Im not sure how to clean a mud encrusted bottom board from an EM.. never had to before... all that craps got to come off.
Im not going to do anything fancy here... ill spray liberally with Sugar Soap.. allow to eat into the dirt.. then high pressure wash it down... rinse with Meths and then blow dry with the compressor and leave in the sun for an hour.
The PF on this is actually very good, but i have a repro i bought from Ebay... was meant to be a first but it isnt.. its a 2nd... mmmmmmmm.. i wonder who would do a thing like that???

Anyway..... CAPTAIN FANTASTIC restore started ( i also started a BALLY HIGH DEAL today as well...lol)...
.. stay tuned.. im sure ill finish it one day!


Offline howzat

  • Trade Count: (0)
  • *****
  • Forum Posts:
Re: Capt Fantastic... what a bloody mess!
« Reply #1 on: August 12, 2012, 09:42:47 PM »
It looks like a big job in front of you  :lol   Im looking fwd to seeing this one      Howzat

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Capt Fantastic... what a bloody mess!
« Reply #2 on: August 12, 2012, 10:17:51 PM »
Looks similar to hyperball lol.   You will sort it out mate along as you don't need any pink touch ups on the playfield  !^!

Offline Boots

  • Trade Count: (+8)
  • ******
  • Forum Posts:
  • Adelaide
Re: Capt Fantastic... what a bloody mess!
« Reply #3 on: August 12, 2012, 10:49:52 PM »
The worse it starts out the more satisfaction when you finish it!
Nothing like draggin a real roughy out of the gutter

Offline Retropin

  • Trade Count: (+4)
  • ******
  • Forum Posts:
Re: Capt Fantastic... what a bloody mess!
« Reply #4 on: August 12, 2012, 10:52:17 PM »
The worse it starts out the more satisfaction when you finish it!
Nothing like draggin a real roughy out of the gutter

LOl- the worse it starts out... the more work in front of me!

Offline Retropin

  • Trade Count: (+4)
  • ******
  • Forum Posts:
Re: Capt Fantastic... what a bloody mess!
« Reply #5 on: August 12, 2012, 10:54:33 PM »
Looks similar to hyperball lol.   You will sort it out mate along as you don't need any pink touch ups on the playfield  !^!

Ouch!!!!... Low shot!

Offline studley67

  • Trade Count: (+7)
  • ******
  • Forum Posts:
  • adelaide hills
    • facebook
Re: Capt Fantastic... what a bloody mess!
« Reply #6 on: August 12, 2012, 11:00:55 PM »
i hope this was a freebie pick-up.lol &&
Life is too short to spend time with people who suck the happiness out of you

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Capt Fantastic... what a bloody mess!
« Reply #7 on: August 12, 2012, 11:27:59 PM »

Will follow with interest. I'm sure it will be a beautifully restored machine  #*#
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Capt Fantastic... what a bloody mess!
« Reply #8 on: August 12, 2012, 11:28:21 PM »
Yeah was a cheap shot but I had to take it  <.>

Offline goodolddays

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Riverstone NSW
Re: Capt Fantastic... what a bloody mess!
« Reply #9 on: August 13, 2012, 09:50:41 AM »
Looks and sounds like quite a challenge for you Gav . Good luck and will watch with interest .
I would imagine there must be a fair bit of rust due to the damp too ?
I need more room ! and more $$$

Offline Retropin

  • Trade Count: (+4)
  • ******
  • Forum Posts:
Re: Capt Fantastic... what a bloody mess!
« Reply #10 on: August 13, 2012, 10:02:23 AM »
Looks and sounds like quite a challenge for you Gav . Good luck and will watch with interest .
I would imagine there must be a fair bit of rust due to the damp too ?

Yes... rust and mud. Luckily though i have a lot of parts from the Night Rider plus a collection of BALLY drop assemblies im not sure how i got..LOL.
Normally with a restore its pretty much just a fix... cabinet repaint and PF touch up etc.
This is a repaint..PF swap, BG replacement and a lot of relay swaps too, so it will be a case of restore and then fix rather than the other way round. Not much of the original machine left by the end  &^&

Offline Caveoftreasures

  • Trade Count: (+16)
  • ******
  • Forum Posts:
Re: Capt Fantastic... what a bloody mess!
« Reply #11 on: August 13, 2012, 11:06:14 AM »
I know u will make it look a million bucks Gav.
After seeing the work u do, i am sure you will do it justice.  I wouldnt think there would be many of these around .
Behind every garage door could be a pinball collectors
"Cave of Treasures" 55 in my collection

Into  Stern -JJP - Cars , Road Bikes- Jet Skis - Star Trek n Sci-Fi & Electronics    
Beware of Stalkers & Walkers when playing The Walking Dead

My 7yr old son Hunter is my best mate in the world !

Offline Retropin

  • Trade Count: (+4)
  • ******
  • Forum Posts:
Re: Capt Fantastic... what a bloody mess!
« Reply #12 on: August 13, 2012, 08:20:51 PM »
Just bought myself a high pressure steam cleaner for the bottom board clean up... Ebay $79 inc postage... thatll do the job nicely... plus wife gets to use it afterwards.
Win win all round i reckon

Offline Retropin

  • Trade Count: (+4)
  • ******
  • Forum Posts:
Re: Capt Fantastic... what a bloody mess!
« Reply #13 on: August 17, 2012, 06:26:40 PM »
Steam cleaner arrived today and so i got stuck in...

Pictures tell the story i reckon..








Offline Homepin

  • Trade Count: (+15)
  • ******
  • Forum Posts:
  • Not a business - A Passion!
Re: Capt Fantastic... what a bloody mess!
« Reply #14 on: August 17, 2012, 08:10:09 PM »
Nice - try a little thinners to get the water out of the contacts  *)*
Replacement Pinball PCBs that remain faithful to the originals