« previous next »
Pages: [1] 2   Go Down

Author Topic: Hi guys  (Read 1173 times)

0 Members and 3 Guests are viewing this topic.

Offline Dazzat

  • Trade Count: (+1)
  • ****
  • Forum Posts:
    • Melbourne
Hi guys
« on: September 26, 2012, 12:07:34 AM »
Hi Dazzat here! (Darren)

I finally bought one of my favourite pinballs 4 months ago that I loved playing back in 92, it is my very first pinny Cue Ball Wizard.
I spent over 60 hours in restoring it to the way I want it after it had been restored buy the seller.. Some people have said that it is the best restore they have seen in a cue ball wizard in some time after I have finished it.... But they could be blowing my trumpet... !@)
My recent mod on it was the "WIZARD" & "DOUBLE" LED's from the old school red & green to white globe blue light LED and it came out really nice.
I suppose one day I will stop detailing it  &&
My next one will be Star Wars Trilogy that I have on order and will pick up in a month.

Glad to be here guys! After a bit of reading there is some nice tut's and interesting convo's
« Last Edit: September 26, 2012, 12:09:16 AM by Dazzat »
Logged

Offline oldpins

  • Trade Count: (+1)
  • *****
  • Forum Posts:
    • Brisbane North QLD
    • oldpinballs.com
Re: Hi guys
« Reply #1 on: September 26, 2012, 06:09:28 AM »
 $.$ &  %)% Darren.
Logged

Offline pinnies4me

  • Administrator
  • Trade Count: (+5)
  • *****
  • High Score Initials:
  • Forum Posts:
    • Victoria
Re: Hi guys
« Reply #2 on: September 26, 2012, 07:59:22 AM »
Welcome go Aussie Pinball Darren!!  ^^^
Logged
“If you wanna escape, go up to a pinball machine. There’s a magic button on the front that takes you to a world under the glass and makes the the rest of the universe disappear.”

Offline swinks

  • Trade Count: (+18)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Lake Macquarie, NSW
Re: Hi guys
« Reply #3 on: September 26, 2012, 10:01:48 AM »
Welcome to AP, and feel free to post some pics of your machine and what you have done.
Logged
https://swinks.com.au

for pinball parts (reproduction & mods)
for pinball t-shirts

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
    • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Hi guys
« Reply #4 on: September 26, 2012, 10:39:25 AM »
 $.$ and  %)% to AP, Darren  ^^^
Logged
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline Replay

  • Trade Count: (0)
  • ******
  • Forum Posts:
    • Gold Coast Queensland
Re: Hi guys
« Reply #5 on: September 26, 2012, 12:22:45 PM »
howdy
Logged

Offline pinballheaven

  • Trade Count: (+3)
  • *****
  • Forum Posts:
    • Melbourne
Re: Hi guys
« Reply #6 on: September 26, 2012, 01:02:41 PM »
Welcome Darren!  %)%
Logged

Offline andtan

  • Trade Count: (0)
  • *****
  • Forum Posts:
    • Canberra, ACT
Re: Hi guys
« Reply #7 on: September 26, 2012, 09:46:44 PM »
 %)% and congrats on your new addition(s)  &&
Logged

Offline KellyNUTS

  • Trade Count: (0)
  • *
  • Forum Posts:
Re: Hi guys
« Reply #8 on: September 27, 2012, 12:00:03 AM »
 %)% dont forget to post up pics of your new toy so we can all have a perve!  ^^^
Logged

Offline Dazzat

  • Trade Count: (+1)
  • ****
  • Forum Posts:
    • Melbourne
Re: Hi guys
« Reply #9 on: September 27, 2012, 11:11:43 PM »
My cue ball wizard is in the shop atm so no photos yet on the detailing I have done, I was cleaning the loom wires in the back board and re cable tying, I am extremely careful with anything electrical having a background (You would think)
My 7 y.o son pulled me away for a minute and I came back and plugged one of my 5v cables for my auxillary? into the power supply A2 and vice versa.... Well bugger me after finishing my cable tying I was pretty proud of myself and switched it on........ Bang and boom with some smoke in back board.
Lots of chips burnt out and so forth, I was told lucky the fuses popped as well and nothing else is blown.
If I am correct it may be beaky (Andrew) receiving my boards to hopefully fix by mail via the pinball place, (Don't know if I can mention them???)
Fingers crossed it will be repairable due to my stupidity  &^&
Maybe he can chime in if it is him repairing... I was told they had to be sent to queensland so I'm just putting 2 & 2 together  %.%
Logged

Offline Caveoftreasures

  • Trade Count: (+16)
  • ******
  • Forum Posts:
Re: Hi guys
« Reply #10 on: September 27, 2012, 11:31:15 PM »
Yes, sounds like Andy(Beaky) if u were dealing with a melb based pinball business. Quite a few pinball companies send their work to Andy.

Have a look at this thread below, it shows the quality of work done.

http://aussiepinball.com/index.php?topic=9349.0

You are in good hands.
Logged
Behind every garage door could be a pinball collectors
"Cave of Treasures" 55 in my collection

Into  Stern -JJP - Cars , Road Bikes- Jet Skis - Star Trek n Sci-Fi & Electronics    
Beware of Stalkers & Walkers when playing The Walking Dead

My 7yr old son Hunter is my best mate in the world !

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
    • Melbourne, Vic
Re: Hi guys
« Reply #11 on: September 28, 2012, 12:01:19 AM »
yep your maths are right.

working on the CPU ATM.
Logged
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)

Offline Dazzat

  • Trade Count: (+1)
  • ****
  • Forum Posts:
    • Melbourne
Re: Hi guys
« Reply #12 on: September 28, 2012, 09:09:56 AM »
Quote from: beaky on September 28, 2012, 12:01:19 AM
yep your maths are right.

working on the CPU ATM.

Ahh fantastic Andy!!!
It certainly looks like it is in capable hands by reading a lot of your amazing posts,  keep me updated on how you are going if you can  $#$
Logged

Offline Dazzat

  • Trade Count: (+1)
  • ****
  • Forum Posts:
    • Melbourne
Re: Hi guys
« Reply #13 on: September 28, 2012, 09:29:42 AM »
Quote from: Caveoftreasures on September 27, 2012, 11:31:15 PM
Yes, sounds like Andy(Beaky) if u were dealing with a melb based pinball business. Quite a few pinball companies send their work to Andy.

Have a look at this thread below, it shows the quality of work done.

http://aussiepinball.com/index.php?topic=9349.0

You are in good hands.

HOLY CRAP that is some fantastic work!!! $#$ Extremely happy that they are in Andy's hands

I'm kicking myself on doing what I did because I always tag cables but due to being interrupted the cables where so close together I crossed them from 5 to 12 **&
I currently do repairs for a forklift company fixing Curtis controllers, and anything electrical on forks, save the company 1000's dollars on replacement, hence a duty to be very careful due to any voltage variables 24, 48 & 240  :D

Oh well looking forward to andy's repair and seeing the final result
Logged

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
    • Melbourne, Vic
Re: Hi guys
« Reply #14 on: October 01, 2012, 02:20:57 AM »
CPU now boots. I had to test CPU, Ram and PIAs so they are now socketed which will make any future repairs easier.
While i have the board i will replace the Button Battery with a Button Battery holder and new Battery.


Logged
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)
Pages: [1] 2   Go Up
« previous next »