Well the Mad Amusement order still no show
but he did finally get back to me, saying he had problems with his email system
Ive replaced some lamp holders (took a few hours)
Once I did that I installed the rest of the LED's and wanted to see how they were looking.
I turned the machine on was all looking good then all of a sudden FIRE WORKS !! came from the back box
Quickly turned off the machine and I found this on the CPU board:
I had a think for a while what could have caused this and had a look in the manual.
The manual says they are for the 4 bumpers and thats where my problem was
Some how when looking at the photos I got the wires around the wrong way
lol
So ive fixed that now and on to fixing the board
Ive managed to get the same TIP122 transistors, but the 2N4401 transistors next to them seem to be harder to find
I have some PN100 transistors here, will they do the job ?
Ive looked then up and says they can be used as a replacement:
http://www.jaycar.com.au/productView.asp?ID=ZT2283
