Author Topic: Gtb Quick Draw  (Read 5725 times)

0 Members and 1 Guest are viewing this topic.

Offline Mr Pinbologist

  • Trade Count: (+5)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Wauchope NSW
Re: Gtb Quick Draw
« Reply #45 on: September 10, 2010, 09:50:54 PM »
Thanx guys for the kind words.

Well today i got the top arch repainted and installed. I stripped it back to bare metal with the clean n strip disc in the drill, then hit it with a few coats of acrylic primer. After that had dried i rubbed the primer back with 400 wet&dry paper, wiped it down with Prepsol and the gave it a couple of coats of acrylic white (1st pic). While that was drying i then buffed up the ball gate and rebound rubber metal mount.

And tonight i refitted the top arch with its parts and fitted it back onto the PF. All of the screw heads have been polished as well, by spinning them in my drill, and using Auto sol and cloth to polish them to a nice shine (2nd pic).

Next to do will be to polish and reinstall the wire lane guides, fit the few posts that havent been fitted yet, and to rebuild the flippers.