Author Topic: Air brush kit  (Read 15467 times)

0 Members and 1 Guest are viewing this topic.

Offline Ford Fairlane

  • Trade Count: (+1)
  • ******
  • Forum Posts:
  • Yass
Air brush kit
« on: February 01, 2013, 01:37:03 PM »
Hi guys, can someone recommend a cheap air brush kit? I'm not a pro so I don't want to spend too much. It's for spraying larger areas on play field enamel or acrylics. Suction or gravity? Nozzle size? Any advice appreciated

Thanks!

Offline Retropin

  • Trade Count: (+4)
  • ******
  • Forum Posts:
Re: Air brush kit
« Reply #1 on: February 01, 2013, 07:36:59 PM »
This'll do for touch ups... 0.3mm nozzle.. by pushing the needle all the way forward or by pulling it back slightly you can get lots of paint flow or very little. Also big enough to allow acrylic to flow OK.
http://www.ebay.com.au/itm/Double-Action-Gravity-Air-Brush-Kit-Spray-Gun-BRAND-NEW-/251221119746?pt=AU_Art_Supplies&hash=item3a7df21302

Any of the $60 compressors will do the trick also.

This one seems exceptional value:

http://www.ebay.com.au/itm/Air-Brush-Spray-Gun-Kit-Set-Nail-Art-Make-Up-Tattoo-Draw-Paint-Compressor-/271088620524?pt=AU_Art_Supplies&hash=item3f1e2413ec


Youll also need one of these which regulates the air rate at the brush end... if air rate is too high then paint just goes splat on your work.. this tool gives nice fine tuning..

http://www.ebay.com.au/itm/KIT-SET-AIRBRUSH-HOSE-4-x-1-8bsp-GUN-CONNECTIONS-MICRO-SPEED-COUPLER-1-8bsp-/150862722062?pt=AU_Toys_Hobbies_Model_Kits&hash=item23201e740e

Most of my airbrushes are under $50 from Ebay... all work well, but if you want to go top quality then look at Paasche or Iwata brands


Offline studley67

  • Trade Count: (+7)
  • ******
  • Forum Posts:
  • adelaide hills
    • facebook
Re: Air brush kit
« Reply #2 on: February 01, 2013, 08:10:54 PM »
i splashed out after stuffing around with a cheap one.bought a VEGA2000 , 3 needles.does every thing i need it to do.cheap compressor blackridge or something from any auto supplier.plus a decent air trap from an airbrush supplier.
Life is too short to spend time with people who suck the happiness out of you

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Air brush kit
« Reply #3 on: February 02, 2013, 11:26:10 AM »
This is my setup, which is basically what Gavin suggested to me while I was looking around ;

Maxus Compressor is a must

http://www.machineryhouse.com.au/C321

Airbrush Micro Valve

http://www.ebay.com.au/itm/MICRO-VALVE-INCLUDED-SPEED-COUPLER-1-8-x-1-8-M-F-/160565052461?pt=AU_Toys_Hobbies_Model_Kits&hash=item25626c442d

Airbrush

http://www.ebay.com.au/itm/AIRBRUSH-KIT0-134K-HOSE-3-x-NEEDLES-3-x-NOZZLES-2-xCUPS-GRAVITY-SUCTION-/150823601466?pt=AU_Toys_Hobbies_Model_Kits&hash=item231dc9853a

Paints

I use Jo Sonja paints with flow medium. Frisket is a little harder to get. I just bought a roll and it has lasted me a while. Hope that helps !
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline Slash

  • Trade Count: (+1)
  • *****
  • Forum Posts:
Re: Air brush kit
« Reply #4 on: June 03, 2013, 03:17:16 PM »
Sorry to bump an old thread but I pretty much have the same question as the OP as I am about to take the plunge, so I was wondering if anyone had any updated suggestions.  One additional requirement I had was that I was also keen to get something that could not only be used for playfield touchups but also for a cabinet respray and also finishing playfields off with things like polyurethane or acrylic clear etc.  Can I just buy something like the above suggestions but get additional nozzles for the other purposes (i.e. clearing or cab resprays)?

Offline skywalker

  • Trade Count: (+2)
  • ******
  • High Score Initials:
  • Forum Posts:
  • melbourne
Re: Air brush kit
« Reply #5 on: August 07, 2013, 10:03:51 PM »
I recently used one for the first time to do some back box touch ups, came up ok considering didn't spent a whole lot of time in prep work etc, i used to retail this stuff, not the cheapest but very good quality, hes local, only deals in air bush stuff compressors & Accessorizes only, hes a one guy operation, so he knows what he taking about, he also goes to all the main model shows & does live demos etc,

  http://runway13.com/store/   hope admin is ok with link  (((

Offline wiredoug

  • Trade Count: (0)
  • ****
  • Forum Posts:
  • Werribee Vic
Re: Air brush kit
« Reply #6 on: August 07, 2013, 11:10:00 PM »
:D

runway13 is a great guy ..highly recommended